» View Question
fmacias

fmacias 1/11/2013

2003 Pontiac Grand Am SE 4 Cyl 2.2L

Engine

vehicle will stall for no apparent reason.

engine runs fine. but for some reason or other it just stalls. started just recently. day bfore it started to stall I had removed the blower motor bcause it was noisy. took care of that problem. while removing fan I removed glove box, 2 covers and some type of module w/wires connected to it. handled w/care. replaced everything. fan was fine and engine ran fine. no problems until the following day. are their any manuf. recalls I should be aware of? Thanks

1 Answer


CVO

CVO 1/11/2013

See this View the latest TSBs & Recalls
http://www.automd.com/


The check engine light doesn't have to be ON to store a fault code.

Check the vehicle for fault codes to see if there are any sensors were involved to the malfunction of the engine.

1.Local auto parts stores such as Autozone ( not in California) or Advance Auto parts will scan and retrieve any diagnostic trouble codes ( dtc ) stored in the powertrain control module for free of charge..

2. Amazon.com has the code reader for less than $20.00 dollars.

3.Re-post the dtc's in here " answer question " for further assistance.

Note: we need the dtc's to identify the sensor, there are a dozen different sensors to operate the car.

Visit this site and see all the different sensors.

http://www.freeautomechanic.com/car-engine-sensors.html

Navigate to this site and see the code reader
http://www.amazon.com/.../...imh_gw_p263_d0_i1

Reply
0

Answer this question

( characters left)

Follow Question

what's this?
advertisement
advertisement