Mazda Questions and Answers

Post your Mazda question or share what you know by answering questions

• Ask a Question
• All Questions
• Unanswered
• Ask a Question

• 2008 Mazda CX-7 Grand Touring 4 Cyl 2.30L Engine - by JJCX7 3/9/2019 Installing the Cam Shafts and timing chain (Engine in CAR) I need to know how to install the remaining parts and get my engine timed. This is where I am I have the head torque down. Now the timing chain, the crankshaft pulley and bolt, the camshafts basically everything is off the block and the head besides the oil pan and ... 0 answers Answer

---

• 2012 Mazda 2 Sport 4 Cyl 1.50L Body & Interior - by Trevor 2/28/2019 Why is my car shaking after a snowstorm? I recently got stuck in a snowstorm and hit some snow drifts on the road going about 55mph. When I got to my destination the car was shaking. I got a diagnostic and everything came out fine. There is no snow in the wheel wells but there is a lot of ice buildup under ... 1 answer Answer

---

• 2003 Mazda Tribute DX 6 Cyl 3.00L Engine - by Stephen 1/15/2019 My Mazda has 6 cyc. It is missing an idling rough like wants to die. It don't I have changed mass air senor . Intake gaskets an coil packs. Still does it would anyone know what is wrong with it 1 answer Answer

---

• 2006 Mazda Tribute i 4 Cyl 2.30L Preventive Maintenance - by Tanka03 1/3/2019 Loosing cold air 1wk after putting freone in A/C. How do I rectify this step by step? After putting freone in A/C unit I got cold air for about 6wks. When I put more freone, it lasted less than 10 days. What could be the problem? Is it a leak? Do I need to put sealant in the unit? Is it the compressor? Is it the condenser? There must be a leak. It ... 1 answer Answer

---

• 2006 Mazda 6 i 4 Cyl 2.30L Engine - by Jaxson 12/18/2018 My 2006 speed 6 will not recalibrate after being serviced so the DMV can't test it. What can I do to recalibrate it? I had my check engine light fixed so it can pass the DMV test. There aren't any indicator lights on, but the DMV test cannot work because the catalytic converter and other things have not reset. I've driven the car many miles. What can I do? 1 answer Answer

---

• 2013 Mazda 5 Sport 4 Cyl 2.50L Engine - by Bfletch89 12/15/2018 Battery change, now a soft whining noise Lately with the cold weather, sometimes the car will start, other times it won't start without a jump. The car is 5 years old and with the original battery, so I figured its time to change it. I just put a new battery in, then when I started it, I hear a whining ... 1 answer Answer

---

• 2013 Mazda 5 Sport 4 Cyl 2.50L Engine - by Bfletch89 12/15/2018 Battery change, now a soft whining noise Lately with the cold weather, sometimes the car will start, other times it won't start without a jump. The car is 5 years old and with the original battery, so I figured its time to change it. I just put a new battery in, then when I started it, I hear a whining ... 1 answer Answer

---

• 2006 Mazda B2300 Base 4 Cyl 2.30L Body & Interior - by Ginger 12/7/2018 Where is the fuel pump switch located As per my owners manuel it is not located under the glove compartmen, right side, above carpet. Have removed glove compartment, nothing behind it either 1 answer Answer

---

• 2006 Mazda B2300 Base 4 Cyl 2.30L Body & Interior - by Ginger 12/7/2018 Where is the fuel pump switch located As per my owners manuel it is not located under the glove compartmen, right side, above carpet. Have removed glove compartment, nothing behind it either 2 answers Answer

---

• 2006 Mazda B4000 Base 6 Cyl 4.00L Engine - by David Crews 11/10/2018 Replace engine? New or reman? 2006 Mazda B4000 (4wd) pickup-about 145,000 miles. Engine has a back belt that needs replacing at a cost over $2,000 because they have to remove engine. Wondering if replacing the engine is a wiser monetary choice since I love the truck & plan to keep it for some ... 2 answers Answer

---

• 2002 Mazda Millenia Base 6 Cyl 2.50L Engine - by Frustrated 10/9/2018 Setting the timing after changing head gaskets My daughter recently had a friend change the head gaskets on her car and while the motor was taken apart the car got put into neutral and moved then once everything was done and put back together they went to start the car and it wouldn't start could the fact that ... 0 answers Answer

---

• 1997 Mazda 626 LX 4 Cyl 2.00L Engine - by Wiley 10/6/2018 What would make my car not get enough gas to start one day and get to much gas the next day? 0 answers Answer

---

• 1997 Mazda 626 LX 4 Cyl 2.00L Engine - by Wiley 10/6/2018 What would cause car not to get enough gas to start one day and too much gas the next? 0 answers Answer

---

• 1997 Mazda 626 LX 4 Cyl 2.00L Engine - by Wiley 10/6/2018 What would cause car to not get enough gas to start one day and get to much the next day? 0 answers Answer

---

• 1997 Mazda 626 LX 4 Cyl 2.00L Engine - by Wiley 10/6/2018 What would cause car to not get enough gas to start one day and get to much the next day? 0 answers Answer