Auto Answers » Body & Interior » Jeep » Page 5

Jeep body & interior repair questions and answers

Post your Jeep body & interior question or share what you know by answering questions

960 Questions
Sort by:
  • gdmccombs
    gdmccombs - 2005 Jeep Liberty - Body & Interior - 7/12/2013
    Back door on driver side, window stopped working (power). Then the door itself will not open
    Now the window has fallen totally down inside the door. It feels like something is stopping the door from opening.Is there anything I can do, or I'm not even sure who to take it to?
    0 answer
  • soul1948
    soul1948 - 2005 Jeep Grand Cherokee - Body & Interior - 7/4/2013
    How do I install replacement door handles?
  • jdshelton67
    • Jimm
      7/1/2013 Jimm
      First step - check the fuse and healdlamp relays and physical connections - be sure these clean and tight. Next, check the headlamp wiring - common to both headlights - there may be a short in one spot due to rubbing the wiring on a metal body part when the vehicle turns.
  • ldbac
    ldbac - 2002 Jeep Grand Cherokee - Body & Interior - 6/25/2013
    If I replace the headlight and turn signal and they still don't work
    The hold passenger side front light don't work but fog lights do
    • HouseCallAuto
      6/25/2013 HouseCallAuto
      Check fuse # 15 in the interior fuse panel. This fuse if open will knock out the low beam on the pass side. Do the high beams work on that side? The turn signal on that side - please explain what is happening in detail.
  • rmi320
    rmi320 - 1999 Jeep Grand Cherokee - Body & Interior - 6/23/2013
    Why is my airbag light on?
    • John's Auto Repair
      6/23/2013 John's Auto Repair
      this means there is a problem with one of the sensors, controls or airbag itself in the airbag circuit.
      A code scanner would be required to diagnose further. This is a safety item and should be looked into.
  • scotswrath
    • Jimm
      6/16/2013 Jimm
      Are you referring to the plastic nozzle? If yes, these are easily replaced - usually held in place by a small screw or bolt. The replacement washer parts are available at any local auto parts stores; be sure to take the old parts to match up.
  • chloenloco
    chloenloco - 2000 Jeep Grand Cherokee - Body & Interior - 6/13/2013
    2000 Jeep Grand Cherokee Limited has no tail lights
    My 2000 Jeep Grand Cherokee limited has no taillights – brakes, flashers/turn signals and reverse/backup lights all operate fine. Replaced the turn signal/multi-function switch first because turn signals were not turning off after turn was completed. Within a day ...
    • Jimm
      6/13/2013 Jimm
      First step - check the headlamp light switch when the tail lights are (supposed to be) on. Use a volt / ohm meter - you should have a small DC voltage - roughly 12 V to the switch and from the switch to the wiring / connection common to both tail lights.

      it is possible to have a faulty headlamp switch, especially since you already replaced most components for each tail light - this says the problem is between the headlamp switch and the components / wiring common to both tail lights.
  • jr1989
    jr1989 - 2006 Jeep Grand Cherokee - Body & Interior - 6/10/2013
    Where could the water that is on my drivers side floor carpet coming from?? It only appears when it rains.
    I have checked the sunroof for leaks, as well as, the window and don't see any leaks coming from them. It only appears on the drivers side.
    0 answer
  • johanbrink
    johanbrink - 2004 Jeep Grand Cherokee - Body & Interior - 5/27/2013
    How do I go about to replace a front parking light bulb myself?
    • Jimm
      5/27/2013 Jimm
      The side marker light must be removed in order to get at the turn signal light.
      There are two screws holding the side marker light which is situated above the turn signal.
      Open the hood.
      Remove the phillips head screw at the top of the side marker light.
      Using a long #2 Phillips screwdriver, remove the screw on the outside of the side marker light. This can be seen by looking between the lower side of the side marker light and the top side of the turn signal.
      The side marker can be moved.
      The turn signal has one screw on the top of the fixture that must be removed.
      Slide out the turn signal fixture. There is a small feature on the lower front corner of the turn signal fixture that you must note to properly reinstall the turn signal.
      In order to get to the bulb, rotate the bulb socket 1/4 turn CW or CCW. The bulb socket is loose.
      The bulb is simply pressed into the socket.
      Not sure of the type, but it can be found at your locale auto parts store.
      The bulb is used in several places on the 2004 GC, so get a packet with two, if possible.
      Assembly in reverse. Be careful not to overtighten the screws as they are replaced
  • ldbac
    ldbac - 2002 Jeep Grand Cherokee - Body & Interior - 5/22/2013
    I change head light bulb and turn sign bulb to
    0 answer
  • lale
    lale - 1994 Jeep Grand Cherokee - Body & Interior - 8/27/2010
    How do I change the head lamp assembly?
    I don't really understand what type of tool and how to remove the old assembly
  • Jerry
    Jerry - 1998 Jeep Wrangler (TJ) - Body & Interior - 5/10/2013
    How do you remove the rear bumper from a TJ
    0 answer
  • bandysingh
    bandysingh - 2010 Jeep Grand Cherokee - Body & Interior - 5/4/2013
    When I run the A/C it is not cooling, but hot air is blowing out of front vents.
    2010 Jeep Grand Cherokee Laredo with 109,000 miles. Do not know if it is the blend mixer or control unit. Compressor is coming on but feels like blender door is not closing
    • frankiedonnn
      5/4/2013 frankiedonnn
      If the A/C and the the low pressure hose is cold then the A/C must be O.K.It could be that the valve that diverts the hot water coming from the engine is not doing so.All of the vent doors are controlled by air through little rubber tubes and if the control on the dash is bad,then nothing works right.I had the same trouble with mine and I secured the valve by hand permantly.Of course it could be that the A/C is low on coolant .
  • joelippert78
    joelippert78 - 2000 Jeep Grand Cherokee - Body & Interior - 4/27/2013
    Locking system malfunction
    The electronic locking system squeals when you push the lock button, now the rear hatch will not unlock,
    0 answer
  • yayamega65
    yayamega65 - 2000 Jeep Grand Cherokee - Body & Interior - 4/25/2013
    Is there more than one lock activator and if so where is the drivers side door one located
    0 answer