Jeep Questions and Answers

Post your Jeep question or share what you know by answering questions

• Ask a Question
• All Questions
• Unanswered
• Ask a Question

• 2010 Jeep Compass Limited 4 Cyl 2.40L Engine - by Urbunner 8/8/2020 Misfiring after crankshaft sensor replacement I have a 2010 jeep compass and got a po300 code indicating a bad crankshaft sensor. Put a new sensor in. Drove it around about 20 minutes and it seemed like the sensor relearned and the car was driving fine. The past 2 days it started out missing and sputtering ... 1 answer Answer

---

• 2005 Jeep Grand Cherokee Limited 8 Cyl 5.70L Engine - by Greg 8/7/2020 Cranks over but Will not start. This happened during a period when we were using the car robot 60 day period before then we never had a problem. Took it to a mechanic and he said it's a module and wants $1500 to repair. I have over 200,000 miles on this jeep and feel like it's not worth fixing it. 1 answer Answer

---

• 2010 Jeep Compass Limited 4 Cyl 2.40L Engine - by Urbunner 8/6/2020 Misfiring after crankshaft sensor replacement I have a 2010 jeep compass and got a po300 code indicating a bad crankshaft sensor. Put a new sensor in. Drove it around about 20 minutes and it seemed like the sensor relearned and the car was driving fine. The past 2 days it started out missing and sputtering ... 2 answers Answer

---

• 2011 Jeep Wrangler (JK) Unlimited Sport 6 Cyl 3.80L Steering & Suspension - by carguru105 8/1/2020 Jeep wrangler steering wheel, shifter and brakes lock Hello! I have a 2011 jeep wrangler unlimited sport and have been experiencing problems when starting the car. Sometimes whenever I start my car the steering wheel and brakes lock up and are stuck, I also can't move the shifter from park to reverse or drive. The ... 1 answer Answer

---

• 1998 Jeep Grand Cherokee Laredo 8 Cyl 5.20L Engine - by Rachel 7/19/2020 Theft mode engaged and cant unengage it please help Hi i have a 1998 jeep grand cherokee v8 5.2 liter and its stuck in theft mode the car will start for 4 to 5 seconds but die immediately after my dash board doesnt work except for my blinkers and abs light my roof reader stopped working after so many attempts to ... 1 answer Answer

---

• 2009 Jeep Wrangler (JK) X 6 Cyl 3.80L Transmissions & Drivetrains - by RockRoller 7/1/2020 P0871 Code need help I have a 2009 JKU that is throwing this code, but it only throws the code when I stop suddenly or take a sudden right turn from speeds higher than 30mph. Or at least that's what I have observed. If I clear the code and drive around town (~30MPH) then the code ... 1 answer Answer

---

• 2010 Jeep Compass Limited 4 Cyl 2.40L Engine - by Urbunner 6/30/2020 Misfiring after crankshaft sensor replacement I have a 2010 jeep compass and got a po300 code indicating a bad crankshaft sensor. Put a new sensor in. Drove it around about 20 minutes and it seemed like the sensor relearned and the car was driving fine. The past 2 days it started out missing and sputtering ... 1 answer Answer

---

• 2014 Jeep Compass Sport 4 Cyl 2.40L Transmissions & Drivetrains - by Cole 6/29/2020 How do I lock the offroad mode in? When I pull up on the T handle it goes into 4wd and stays in 4wd until i pull the T handle again, then it turns off. However when i hold the t handle upward a light on the speedometer side of the dash comes on as "4wd!". I am assuming that this is the offroad mode ... 1 answer Answer

---

• 2002 Jeep Grand Cherokee Laredo 6 Cyl 4.00L Engine - by 4x4jeep 6/24/2020 Cannot I fix code p0204 This is a 2002 4x4 Laredo 6 cylinder 4.0.. this site will NOT let me choose that engine I cannot get rid of this code I replaced the PCM with one I got from eBay , spark plugs, coil, the injectors ... I removed the wiring harness and checked it. I have put a ... 2 answers Answer

---

• 2003 Jeep Liberty Sport 4 Cyl 2.40L Engine - by Devon Visser 5/22/2020 Problems with starting my Jeep 2.4 Hi all A got Jeep cherokee 2.4 sport . Change the engine last week and struggled. Now I got no spark on the coils . I checked my wiring and all good .i plug the diagnostic in . But doesn't pic up my engine or ECU. Then I traced a wire that's connected to ... 0 answers Answer

---

• 2008 Jeep Wrangler (JK) Rubicon 6 Cyl 3.80L Engine - by Chad 5/16/2020 All dash lights come on but NO CRANK Hello! Please forgive me if I am posting this in the wrong section. I own a small dealership and we have a 2008 Jeep Rubicon automatic that has us all stumped and we have tried everything we know! I drove the Jeep several hundred miles after purchasing to sell ... 1 answer Answer

---

• 2007 Jeep Liberty Limited 6 Cyl 3.70L Preventive Maintenance - by Jean Guy 5/2/2020 Clicking sound in my drivers side dash and when I put my key in it doesn't start. Hi.my 97 liberty was running fine last night when I arrived. This morning I went in my jeep to try to stat it by when I opened the door to get in I Hurd a clicking sound in my drivers side dash. So I tried to start it but it didn't. As soon as I put my key forward ... 1 answer Answer

---

• 2007 Jeep Liberty Limited 6 Cyl 3.70L Preventive Maintenance - by Jean Guy 4/29/2020 Clicking sound in my drivers side dash and when I put my key in it doesn't start. Hi. My jeep liberty was running fine last night when I arrived at home. So this morning when I opened the door to get in my jeep liberty there was a clicking sound in my drivers side dash so I tried to start it but it didn't. As soon that I put my key forward to ... 0 answers Answer

---

• 2007 Jeep Liberty Limited 6 Cyl 3.70L Preventive Maintenance - by Jean Guy 4/29/2020 Clicking sound in my drivers side dash and when I put my key in it doesn't start. Hi. My jeep liberty was running fine last night when I arrived at home. So this morning when I opened the door to get in my jeep liberty there was a clicking sound in my drivers side dash so I tried to start it but it didn't. As soon that I put my key forward to ... 0 answers Answer

---

• 2007 Jeep Liberty Limited 6 Cyl 3.70L Preventive Maintenance - by Jean Guy 4/29/2020 Clicking sound in my drivers side dash and when I put my key in it doesn't start. Hi. My jeep liberty was running fine last night when I arrived at home. So this morning when I opened the door to get in my jeep liberty there was a clicking sound in my drivers side dash so I tried to start it but it didn't. As soon that I put my key forward to ... 0 answers Answer