Auto Answers » Preventive Maintenance » Chrysler » Page 21

Chrysler preventive maintenance repair questions and answers

Post your Chrysler preventive maintenance question or share what you know by answering questions

Browse Chrysler Categories

370 Questions
Sort by:
  • chas
    chas - 2004 Chrysler Town & Country - Preventive Maintenance - 12/3/2010
    How long to remove and install radiator
    radiator remove and replace
    • CVO
      12/3/2010 CVO
      Follow the link bar on the top and click on the Estimate Costs.( approximately 2.0 hours) Hope this help and be safe.
  • sharon
    sharon - 2002 Chrysler Concorde - Preventive Maintenance - 12/1/2010
    I need to replace the relay switch for my turn signals, I have the switch, I don't know where to place it.
    I think it is supposed to go in the fuse and relay box just inside the driver side front door on the dash, but there is not a slot for the fuse that I got. Please advise where I should place this relay plug.THanks
    • CVO
      12/1/2010 CVO
      Consult a vehicule repair manual like Haynes or Chilton for free at your local public library . Follow their instructions.
      Hope this help and be safe.
  • val
    val - 2008 Chrysler Sebring - Preventive Maintenance - 11/26/2010
    On some days car will not accerlerate
    the symbol in my handbook says it is an electronic throttle.
    • CVO
      11/26/2010 CVO
      In this case, you answered your own question.It is the throttle position sensor. Check with Chrysler, their warranty will cover the car powertrain for 7 years or 70.000 miles. Hope this answers your question and be safe. HAPPY HOLIDAYS.
  • TGunn
    TGunn - 2008 Chrysler Town & Country - Preventive Maintenance - 11/26/2010
    I need driver side headlamp assembly. Mine holds moisture blowing HID bulb. Looking to replace with non HID asssembly
    I went to get a bulb replaced and the dealer told me that the headlight assembly is holding moisture which blows my HID bulbs. It looks like a replacement part from part # ARBC100102 will fit but i am not sure if the wiring is compatible. The ...
  • DanO
    DanO - 2005 Chrysler Sebring - Preventive Maintenance - 11/12/2010
    Why do my dim lights not work?.
    I have driving lights and brake lights and turn lights. Four way flashers and hi beams. I just replaced the head lamps and associated fuses.
    0 answer
  • Deborah
    Deborah - 2000 Chrysler Grand Voyager - Preventive Maintenance - 11/10/2010
    How do I change out the thermostate in this vehicle?
      11/10/2010 MOONSTER_TOOLZ
      Before proceeding to do the task, make sure the engine is cold. The removal procedure is the following;
      1.Disconnect the negative battery cable.
      2.Place a drain pan under the radiator drain and drain the cooling system to just below the thermostat level. Close the drain.
      3.Remove the upper radiator hose from the thermostat housing, and then remove the housing.
      4.Remove the thermostat and discard the gasket.

      1.Clean the housing mating surfaces.
      2.Dip the new gasket in clean water and place it on the water box surface.
      3.Center the thermostat on the gasket, in the water box.
      4.Make certain the bolt threads are clean. Threaded bolt holes exposed to coolant are subject to corrosion and should be cleaned with a small wire brush or correct size thread-cutting tap. Install the housing, making sure the thermostat is still in the recess, and tighten the retaining bolts to 105 in. lbs. (12 Nm) for 3.0L engine or to 21 ft. lbs. (28 Nm) for 3.3L and 3.8L engines.
      5.Reconnect the upper radiator hose and tighten the hose clamp.
      6.Connect the negative battery cable.
      7.Fill and bleed the engine cooling system with a clean 50/50 mixture of ethylene glycol antifreeze and water.
      8.Make sure the radiator is full and start the vehicle.
      9.Run the vehicle until the thermostat opens. Check the coolant level in the overflow tank and fill if necessary.
      10.Pressure test for leaks

  • tspurill
    tspurill - 2003 Chrysler PT Cruiser - Preventive Maintenance - 11/9/2010
    I had a water pump installed and the auto is still overheating. one of the screw holes were stripped to hold the
    thermostat housing down. a new screw was replaced and sealant put in hole to stop leak. but it is still overheating.
    • Fox Hound
      11/9/2010 Fox Hound
      So you dont have any leaks? Is your aux fan working? Did you place your thermostat in the correct position? Is your radiator being blocked by something preventing the water from circulating?
    • HouseCallAuto
      11/9/2010 HouseCallAuto
      Either the radiator is no good or the head gasket is bad. Assuming the thermostat is not damaged and is installed facing the right way. ==============OR================>>

      you did not open the bleed screw and purge out the air that is trapped in the cooling passages.
      8/21/2011 dom
      how do you bleed the system after you install new thermostat
  • Barbara
    Barbara - 2006 Chrysler Pacifica - Preventive Maintenance - 11/7/2010
    1,,my air filter is dirty i need to replace it but cant find one,,, obd light stays says melfunction
    indicator light,,,what does this mean,,it doesnt flash,,,but should i weary about this..the car viborates some,,so i dont know if i got bad gas or not..what can i do to make this light go off..the gas cap is on good..
    • TechSam
      11/7/2010 TechSam
      Barb my darlin, it is good to have an air cleaner in the car so your engine breathes easy and second the OBD light is there to tell the driver that some thing is OR failing in the vehicle and so the driver can have the vehicle scanned for trouble codes.
  • pat
    pat - 2008 Chrysler Pacifica - Preventive Maintenance - 10/28/2010
    I have a short on the driver side low beam
    • yboy82
      10/28/2010 yboy82
      You may need to adjust your headlight your can visit this link to have an idea how to perform it (it’s not the specific guide for your vehicle)
      10/28/2010 yboy82
      you might use an allen wrench (a long one)
    JOHN WILLIAMS - 2006 Chrysler Town & Country - Preventive Maintenance - 10/27/2010
    How do I replace the windshield washer motor?
  • lee2
    lee2 - 2002 Chrysler PT Cruiser - Preventive Maintenance - 10/26/2010
    Timing on pt cruiser
    i think i know how to change belt & pump from the show how step by step 1st do ineed to take valve cover off 2nd do i need a special tool to put crank shaft pully back on. 3rd if i don't move crank or cam do i still need to line up timing marks. tks
    • HouseCallAuto
      10/26/2010 HouseCallAuto
      You always align the timing marks to TDC. Do yourself a favor and get a repair manual that has the pics and the steps. You only need a special tool for removing the crank pulley, not to reinstall it. The puller that you need is unique and is just for the 2.4 engine, it is not the all-purpose harmonic balancer puller, it is a three-jaw puller with a separate rod that inserts into the end of the crankshaft that the pressure screw pushes against.
  • jim
    jim - 2008 Chrysler Town & Country - Preventive Maintenance - 10/26/2010
    Tire sensor : can i replace just the stem or do i need to replace the whole sensor.
    stem broke at cap end. NAPA has a stem replacement kit. part number NTH 920245
    • AWACS E3 Sentry
      10/26/2010 AWACS E3 Sentry
      I'd just buy the entire kit. It will give me peace of mind rather reparing the broken stem.
    VICTORIA - 1998 Chrysler Town & Country - Preventive Maintenance - 10/26/2010
    Alarm light stay on it has about 144630miles
    we change the fuel pump and it starts ok but the alarm light stay on can you please advise me
    • yboy82
      10/26/2010 yboy82
      Is it your check engine light? If it is diagnose your vehicle with a scan tool to know if there is a stored trouble code in your vehicle, before you reset it. You can go to AutoZone or nearby auto parts store for free diagnostic.
  • brenda riekena
    brenda riekena - 1999 Chrysler Cirrus - Preventive Maintenance - 10/25/2010
    Where is the fuel filter located on a 99 chrysler cirrus 2.5 ltr
    • HouseCallAuto
      10/25/2010 HouseCallAuto
      The fuel filter mounts to the frame above the rear of the fuel tank. The inlet and outlet tubes of the filter are permanently attached to the filter.
  •  Itaska Morrison
    • Tifosi
      10/19/2010 Tifosi
      There are 2 large bolts above each headlight housing on the top sill of the front of the car where the hood closes over them. They look like they would hold the sill to the car, but they hold a large metal headlight assembly. Remove the 2 bolts, the housing will slide forward and then you can remove the bulbs.