Auto Answers » Engine » Chrysler

Chrysler engine repair questions and answers

Post your Chrysler engine question or share what you know by answering questions

474 Questions
Sort by:
  • SuperMommy
    SuperMommy - 2006 Chrysler Town & Country - Engine - 4/16/2015
    Is my car possessed??
    2006 Chrysler Town and Country, 120k miles. Odometer lights flicker, gauges drop up and down, radio pops on and off, air/heat turns on and off, car dings and brake/ABS lights flash. All of these happen within a few seconds of each other. Had a diagnostic done, ...
     
    0 answer
  • chrysler 300 c
    chrysler 300 c - 2005 Chrysler 300 - Engine - 4/11/2015
    My car turns off when I stop at a red light..when I turn it back on it hesitates to drive for a couple of seconds.
    When im driving my car will turn off when I stop and it will hesitate to drive for a couple of seconds..at times when.im driving on highway it will try to turn off on me if im not giving b it gas
     
    0 answer
  • chrysler 300 c
    chrysler 300 c - 2005 Chrysler 300 - Engine - 4/11/2015
    My car turns off when I stop at a red light..when I turn it back on it hesitates to drive for a couple of seconds.
    When im driving my car will turn off when I stop and it will hesitate to drive for a couple of seconds..at times when.im driving on highway it will try to turn off on me if im not giving b it gas
     
    0 answer
  • chrysler 300 c
    chrysler 300 c - 2005 Chrysler 300 - Engine - 4/11/2015
    My car turns off when I stop at a red light..when I turn it back on it hesitates to drive for a couple of seconds.
    When im driving my car will turn off when I stop and it will hesitate to drive for a couple of seconds..at times when.im driving on highway it will try to turn off on me if im not giving b it gas
     
    0 answer
  • chrysler 300 c
    chrysler 300 c - 2005 Chrysler 300 - Engine - 4/11/2015
    My car turns off when I stop on a red light when I step on gas it hesitates to run and will turn off
    My car turns off when im driving and it hesitates to run when the car turns off all the lights turn on and it starts to stall on me... at times it runs for about 5 minutes when I stop on a red light the car turns off and it hesitate to run for about a couple of ...
     
    0 answer
  • Mäel
    Mäel - 2008 Chrysler 300 - Engine - 4/7/2015
    OBD 2 will not link for state inspection
    obd2 will not link all fuses are good the handheld scanner is getting power from the obd2 port no error codes engine light not on car runs great, but its failing the state inspection because of this inability to link to their computer
     
    0 answer
  • Jenny86
    Jenny86 - 2005 Chrysler PT Cruiser - Engine - 4/3/2015
    My car won't start!! It died while driving it. No noise when you turn the key. HELP!!
    we have just over 100,000 miles. Our engine light is ALWAYS on. 4 codes come up: 3 misfires and 1 evap purge system performance. We have replaced the spark plugs and wires in 2013 except for 1 plug that was "stuck" When we could drive it, if you accelerated to pass ...
     
    0 answer
  • matt sweet
    matt sweet - 2006 Chrysler Town & Country - Engine - 4/2/2015
    Why won't the vehicle crank
    While driving the van it lost power and shut off. It won't start back. It will turn over but won't fire.
     
    0 answer
  • Rich
    Rich - 2005 Chrysler Town & Country - Engine - 3/21/2015
    Engine shut down @ 65 mph, no warning. will turn over normally. no ignition.
    My guess is the crankshaft position sensor???
     
    0 answer
  • steve
    steve - 2000 Chrysler Concorde - Engine - 3/12/2015
    Fires only 1 cylinder
    "i just replaced head gaskets and timing chains and waterpump in a 2000 concorde with a 2.7 also put new plugs in it car wont start and now can only get 1 cylinder to fire? injectors are all working checked with diode lights and i checked and have 150lbs compression ...
     
    0 answer
  • steve
    steve - 2000 Chrysler Concorde - Engine - 3/12/2015
    Fires only 1 cylinder
    "i just replaced head gaskets and timing chains and waterpump in a 2000 concorde with a 2.7 also put new plugs in it car wont start and now can only get 1 cylinder to fire? injectors are all working checked with diode lights and i checked and have 150lbs compression ...
     
    0 answer
  • steve
    steve - 2000 Chrysler Concorde - Engine - 3/12/2015
    Only fires 1 cylinder
    "i just replaced head gaskets and timing chains and waterpump in a 2000 concorde with a 2.7 also put new plugs in it car wont start and now can only get 1 cylinder to fire? injectors are all working checked with diode lights and i checked and have 150lbs compression ...
     
    0 answer
  • steve
    steve - 2000 Chrysler Concorde - Engine - 3/12/2015
    Only fires 1 cylinder
    "i just replaced head gaskets and timing chains and waterpump in a 2000 concorde with a 2.7 also put new plugs in it car wont start and now can only get 1 cylinder to fire? injectors are all working checked with diode lights and i checked and have 150lbs compression ...
     
    0 answer
  • Donald
    Donald - 2001 Chrysler Sebring - Engine - 3/8/2015
    Car is not blowing heat
    Removed a upper radiator hose to remove the alternator and lost coolant. Forgot to replace it and ran the engine for a while so I could utilize then controls for the convertible top. I realized the vehicle was not blowing heat. ( I live in Vermont and its cold here) ...
     
    0 answer
  • jose
     
    0 answer