Chrysler Questions and Answers
Post your Chrysler question or share what you know by answering questions
Get your questions answered by the AutoMD Community.
Share your expertise and help others with vehicle questions.
Browse Chrysler Categories
2001 Chrysler Town & Country LX 6 Cyl 3.3L
Engine - by brian 11/15/2010I have 2 codes p1694and p1192
i replaced air inlet temp sensor when driving i lose voltage to that sensor on and off
2004 Chrysler Sebring LX 4 Cyl 2.4L
Steering & Suspension - by Jack 11/15/2010I need to replace the original rear camber shaft(which isn't adjustable) with one that is adjustable....not factory
I need the alignment done and cannot complete the alignment until it is replaced I got all this information from a Goodyear tech.
1999 Chrysler Concorde LX 6 Cyl 2.7L
Engine - by cymbalsmash 11/14/2010Have no heat changed thermostat
i replaced thermostat radiator cap heater blend door and thaa heater core is fine what else could be wrong
2002 Chrysler Voyager LX 6 Cyl 3.3L
Transmissions & Drivetrains - by AutoMD 11/14/2010What is wrong when the diagnostic meter indicates P0700 Trans control system malfunction?
the check engine light is on the symptom happen when the engine is turned on and remains on until the engine is turned off I don't feel any difference in driving
1983 Chrysler Cordoba Base 8 Cyl 5.2L
Body & Interior - by stan saari 11/14/2010Looking for a replacement vinyle top or a company that can supply, car has collector status
1997 Chrysler Town & Country LX 6 Cyl 3.8L
Brakes - by ron r. 11/14/2010Why does my front abs lock up
ABS light on and brakes lockup after driving 4 miles, after it sits for about 1 hr, they release. i can release the fluid in the front line on the master cyl. and this will let me drive another 4 miles. first i was told by a chrysler mach. it was my brake lines ...
2002 Chrysler Sebring LX 4 Cyl 2.4L
Engine - by Gavin Lau 11/14/2010The low oil warning light comes on and off.
After the vehicle is warm, the low oil warning light will appear when I let off the gas, ie: at a red light. As soon as I accelerate, the light will turn off. This doesn't happen when the engine is cold. All preventive maintenance is done on schedule, and fluids ...
2005 Chrysler Town & Country Base 6 Cyl 3.3L
Engine - by jusema 11/13/2010THE PCM ECM MODULE GOT BURNT AND REPLACED BY A PREPROGRAM MODULE. BUT STILL THE CAR WONT START BUT CRANK
EACH TIME WE CRANK THE ENGINE THE HAZARD AND HEAD LAMP FLASHES. MY TECHNICIAN THINKS THE SECURITY SYSTEM IS ACTIVATED THAT ISWHY THE SPARKPLUG IS NOT RECEIVING ANY CURRENT
1999 Chrysler Sebring LX 6 Cyl 2.5L
Engine - by david 11/12/2010My brothers car has no spark . can you help
my brother took the starter off because it was burt up trying to start it. but he told me he tested it wile it was laying on the pcm he used it for the ground i didnt know if that would cause a problem with the no spark condition or not. I figured it would but I ...
2005 Chrysler Sebring Base 4 Cyl 2.4L
Preventive Maintenance - by DanO 11/12/2010Why do my dim lights not work?.
I have driving lights and brake lights and turn lights. Four way flashers and hi beams. I just replaced the head lamps and associated fuses.
1987 Chrysler Conquest Base 4 Cyl 2.6L
Engine - by mukai5 11/11/2010Why does it blow white smoke even after warm up?
it blows white smoke after warm up
1998 Chrysler Sebring LX 6 Cyl 2.5L
Engine - by rpss811 11/11/2010I have been told that my car has low oil pressure and that it is not worth fixing. can you give any advice on this?
1997 Chrysler Cirrus LX 6 Cyl 2.5L
Engine - by lovesicp 11/10/2010Have a 97 chrysler cirrus lx 2.5l v6 wont start
just changed water pump everything was fine didnt realize our gas gauge wasnt working properly ran out of gas put gas in will not start fuel pump is working, everything else is fine, ??
2000 Chrysler Grand Voyager SE 6 Cyl 3.3L
Preventive Maintenance - by Deborah 11/10/2010How do I change out the thermostate in this vehicle?
2006 Chrysler Town & Country Base 6 Cyl 3.3L
Engine - by mike 11/9/2010Have a leak in fuel line at the connector which is below air box of air filter, how do i fix this?