Auto Answers » Body & Interior » Chevrolet » Page 2

Chevrolet body & interior repair questions and answers

Post your Chevrolet body & interior question or share what you know by answering questions

3495 Questions
Sort by:
  • Nancy
    Nancy - 2011 Chevrolet Traverse - Body & Interior - 3/15/2015
    Key stuck in ignition, power windows don't work, not turn signals, hatch lock will not open
    Dealer says may take days, many hours to diagnose
     
    0 answer
  • laurie
    laurie - 1998 Chevrolet Lumina - Body & Interior - 3/9/2015
    Radio wont work what can I do
    the radio wont work could it be the fuses if so what number would this fuse be?
     
    0 answer
  • Michelle Chambers
    Michelle Chambers - 1988 Chevrolet Corvette - Body & Interior - 3/4/2015
    My tail lights & running lights stopped working. What can we check?
    We have no blown bulbs or fuses. There is fire going to the fuses.
     
    0 answer
  • Ronthree
    Ronthree - 1987 Chevrolet Camaro - Body & Interior - 3/4/2015
    Have a 350 small block with Holley carb on it .
    My hood scoop is illegal in va , can I put any hood on it
     
    • Jimm
      3/4/2015 Jimm
      Check with the state requirements within your area.
  • Anita Russell
     
    0 answer
  • Trebla
    Trebla - 1999 Chevrolet Astro - Body & Interior - 2/28/2015
    How can I open the rear lift hatch door when only one side unlocks?
    When I press the middle button on the door, I hear both lock solenoid motors engage, but only the left unlatches, the right side remains locked and I cannot open the lift door.
     
    • anitadoud
      2/28/2015 anitadoud
      You can get the correct instruction about the chevrolet astro from the company.They are providing different types information and guidelines about the vehicle.Visit good site for more information. http://american-writers.org/
  • Hussemo
    Hussemo - 1995 Chevrolet C1500 - Body & Interior - 2/26/2015
    What's wrong with my ac and heater?
    When I turn the dial nothing happens. 95 Chevy Silverado 1500 8 cyl.
     
  • Art
    Art - 2011 Chevrolet Camaro - Body & Interior - 2/19/2015
    Replace outside passenger mirror glass
    have to remove mirror glass to paint new mirror assembly
     
    • Jimm
      2/19/2015 Jimm
      To remove the door trim, you will first need to remove the small speaker on the corner of the door panel. Use some muscle to wiggle it out, then disconnect the wires.

      Once you have removed the speaker, you will need to take out 5 screws in total. The 3 around the periphery are easiest, they are nut-head style screws. The one in the armrest is under a rubber protector which you can just lift out. This one requires a special type of bit (Torx) so make sure you have it before you start this.
      The screw in the door handle is a little tricky to get to; you will need to remove the plastic covering by getting behind it through the edges and pulling out. You may use use a thin s-hook for this.

      Now that you have removed the speaker and screws, you will again need to use some muscle to pull out the trim. Start from the corner near the lock and work your way around - prying it off. It will sound like you broke something each time a clip comes out, this is normal. There are a number of retainers near the top as well. Just pull up and out
      Now that the trim is out, you can rest it on something under the door, unless you want to disconnect all the wiring and door latch if you want to remove it altogether.
      To remove the mirror, you will need to pop out the rubber caps. They come right off, exposing the nuts inside.

      To remove the nuts, you will need a ratchet, with an adaptor to reach the somewhat deep nuts, and a deep 10 mm socket since there is a good bit of thread running through them. There are 3 in total.

      Make sure you do not let the nuts fall into the door!
      For this, you can use some thin cardboard as a type of funnel - to have them slide out as they came loose. Use your imagination.
  • frank
    frank - 2004 Chevrolet Silverado 1500 - Body & Interior - 2/18/2015
    Just bought the 604-106, temperature air blend door actuator and it wont work properly.
    I googled for solutions and came across that the actuator has to be reset. Is this true, if so Can you please send me the reset instructions.....something about disconnecting battery etc..
     
    0 answer
  • Joe
    Joe - 2014 Chevrolet Impala - Body & Interior - 2/18/2015
    How do I remove/replace a damaged turn signal light assy. built into the door side view mirror?
    The turn signal indicator in passenger door mounted rear view mirror was damaged in a parking lot. How is the assy. removed? Does entire mirror have to be removed? This is not the arrow type stuck to the backside of the mirror-it's the actual amber/clear plastic ...
     
    0 answer
  • medtechfire
    medtechfire - 2005 Chevrolet Malibu - Body & Interior - 2/16/2015
    What did I breal now?
    I attempted to roll my window down today (in below zero weather). Needless to say the window was frozen in place. Instead of waiting for the ice to melt I continued to press the window button up and down till I heard a pop. The window stayed in place but I heard the ...
     
    • Teddy B
      2/15/2015 Teddy B
      Window Regulator Broke
      Teddy B
      2/15/2015 medtechfire
      Thank you Teddy. Appreciate the answer.
    • Jimm
      2/16/2015 Jimm
      Probably snapped the window lift cable. The power window regulator assembly will need to be replaced.

      If you removed the door panel and replaced the window lift assembly yourself - the cost is minimal; maybe $50.00 - $70.00 for the power window lift and motor assembly as a unit. Check the 'How-To-Guides' feature on the AutoMD website for these steps.

      Check these various on-line vendors; www.autopartswarehouse.com, www.RockAuto.com, www.partsgeek.com, to list only a few. For example, they (RockAuto) list the power window motor and regulator from around $50.00 for your vehicle.
  • medtechfire
    medtechfire - 2005 Chevrolet Malibu - Body & Interior - 2/16/2015
    What did I breal now?
    I attempted to roll my window down today (in below zero weather). Needless to say the window was frozen in place. Instead of waiting for the ice to melt I continued to press the window button up and down till I heard a pop. The window stayed in place but I heard the ...
     
    • Jimm
      2/16/2015 Jimm
      Probably snapped the window lift cable. The power window regulator assembly will need to be replaced.

      If you removed the door panel and replaced the window lift assembly yourself - the cost is minimal; maybe $50.00 - $70.00 for the power window lift and motor assembly as a unit. Check the 'How-To-Guides' feature on the AutoMD website for these steps.

      Check these various on-line vendors; www.autopartswarehouse.com, www.RockAuto.com, www.partsgeek.com, to list only a few. For example, they (RockAuto) list the power window motor and regulator from around $50.00 for your vehicle.
      Jimm
      2/16/2015 medtechfire
      Awesome Jimm thank you.
  • Phil
    Phil - 1999 Chevrolet Silverado 1500 - Body & Interior - 2/14/2015
    Why does my cold hot diverter only allow hot air
    ac compressor does work but diverter wont go back to cold , turn it to cold and hot air still comes out
     
    0 answer
  • TAD
    TAD - 2007 Chevrolet Avalanche - Body & Interior - 2/13/2015
    WHAT TRIGGERS DOOR SWITCH TO READ OPEN OR CLOSED?
    JUST HAD BODY WORK DONE AND DOOR REPLACED
     
    0 answer
  • MacOverPc
    MacOverPc - 2011 Chevrolet Caprice - Body & Interior - 2/11/2015
    Auxiliary power outlet
    The power outlet on my caprice quit working. Any info please
     
    • jdl
      2/11/2015 jdl
      Check the instrument panel fuse block. APO--fuse 14--20 amp fuse. Not only check the fuse, use a testlight, check for voltage on the fuse circuit. Go from there.