» View Question
osubucks22

osubucks22 1/5/2020

2013 Ford Taurus SE 6 Cyl 3.50L

Transmissions & Drivetrains

Park light wont read "P"

I have a 2013 Ford Taurus. I recently replaced the fuel pump after months of sitting. Once I got it running I drove it and went to park the car, and while the transmission itself will go in park, the dash light will not indicate that the vehicle is in park. The dash will show the every other gear, reverse, neutral, drive, and the manual option just not park. This also dose not allow my key to be released from the ignition and some of my dash lights to stay on running my battery dead. I've done some research but nothing I find really matches up exactly to my problem.

1 Answer


Jimm

Jimm 1/5/2020

There are several possibilities; transmission gear selector out-of-adjustment, faulty range selector on the transmission, faulty Park light bulb - to list only a few.

This is commonly associated with a sensor in the gear selector assembly, which notifies the transmission control module and body control module to which range the gear selector is set.

Check the light bulb and gear / range selector adjustment first - before replacing any parts.

Try these on-line auto parts sources; www.autopartsanything.com; www.partsgeek.com; www.rockauto.com - to list a few.

In fact they (RockAuto) list the neutral range sensor / safety switch from around $43.00 for your vehicle.

Neutral safety switch / range sensor = STANDARD MOTOR PRODUCTS part# NS627 {#9L8Z7H557A}

Reply
0

Answer this question

( characters left)

Follow Question

what's this?
advertisement
advertisement