Auto Answers » View Question
koe 4/24/2012
1999 GMC K2500 Suburban SLE 8 Cyl 7.4L - Engine
I installed a new fuel system under a 7.4 suburban also replaced to distributor by procedure now it won't start help!
I also replaced the gaskets under the lower intake I've checked everything over several times I am at tdc center and distributor is pointing to where it needs to I have spark and fuel but will not start
2 Answers
  • kay
    kay 6/24/2012
    check the fuel pump relay
  • jdl
    jdl 6/24/2012
    Was it tdc on the compression stroke? Do you have good cylinder compression? The rotor pointer needs to be within a few degrees of the #8 on the casting pointer.

Preview Answer