» View Question
KEN B 207

KEN B 207 1/17/2011

1994 Ford Explorer XLT 6 Cyl 4.00L

Body & Interior

HOW DO I TAKE OUT THE REAR WINDOW MOTOR I AM HAVING PROBLEMS

2 Answers


yboy82

yboy82 1/17/2011

You have to raise the window fully if possible. If not, you will have to support the window during this procedure. And then disconnect your negative battery cable. Remove the door trim panel and then disconnect the window motor wiring harness. There may be a drill dimple in the door panel, opposite the concealed motor retaining bolt. Drill out the dimple to gain access to the bolt. Be careful to avoid damage to the wires.

You should remove the motor mounting bolts (front door) or rivets(rear door). And then push the motor towards the outside of the door to disengage it from the gears. You'll have to support the window glass once the motor is disengaged. Remove the motor from the door.

Reply
0
yboy82

yboy82 1/17/2011

Installation is the reverse of removal.
Apply prime and paint the exposed metal, or, cover the holes with waterproof body tape in the drilled areas to avoid rusting. Test your motor if it works properly before installing the trim panel.

Reply
0

Answer this question

( characters left)

Follow Question

what's this?
advertisement
advertisement