» View Question
emily frake

emily ... 2/19/2012

1995 Jeep Cherokee Sport 6 Cyl 4.0L

Steering & Suspension

How do you fix the stabilizer bar or sway bar on a 95 jeep Cherokee ?

Stabilizer bar broke

1 Answer


Jay Giron

Jay Giron 2/26/2012

Removal & Installation

Raise and support the vehicle safely.

Image:

http://content.chiltonsonline.com/.../91078p41.gif

http://content.chiltonsonline.com/.../91078p37.gif

http://content.chiltonsonline.com/.../91078p39.gif

Disconnect the stabilizer bar at the connecting links. If necessary, disengage the connecting links from the brackets on the front axle housing.

http://content.chiltonsonline.com/.../91078p40.gif

Remove the stabilizer bar-to-frame clamps and cushions, and remove the stabilizer bar.
To install:
Position the bar on the vehicle and install the clamps and cushions finger-tight.
Tighten the clamp-to-frame bolts to 55 ft. lbs. (75 Nm), the stabilizer bar-to-connecting link nuts to 27 ft. lbs. (37 Nm), and the connecting link-to-axle bolts to 70 ft. lbs. (95 Nm).

Reply
0

Answer this question

( characters left)

Follow Question

what's this?
advertisement
advertisement