Auto Answers » View Question
johnny 12/27/2012
2010 Nissan Cube S 4 Cyl 1.8L - Transmissions & Drivetrains
How do I add cvt fluid
I accidentally drained my cvt fluid instead of engine oil and I just need to add some cvt fluid back into it
2 Answers
  • Jimm
    Jimm 12/27/2012
    Use the fill plug on the side of the transmission, plus a long tube / hose and funnel. Be sure to use the correct CVT fluid
    johnny 12/27/2012
    Thanks Jim, that's what I was dreading. How do I know when it's full
  • rick
    rick 12/27/2012
    When it starts to run out the FILL HOLE it is full . The fill hole is about 1/2 way up on the side of tranny . If you need to check it at a later date you do the same thing . Pull fill plug and oil should be right there . If need be use your finger as a dip stick . If you can't touch the oil with your finger add a little till you can or it comes out the hole .

Preview Answer