» View Question

travis 2/28/2019

1997 Ford Expedition XLT 8 Cyl 4.60L

Transmissions & Drivetrains

electrical / transmission

hello i purchased my expedition with rebuilt engine that has around 90'000 on it but transmission pump went out on it with the previous owner being the reason he sold it . I checked it out with my scan tool it cranked perfect everything was good all but transmission , i had the transmission rebuilt being pump went out and it originally has over 200'000 miles , after the rebuild i installed the transmission back in everything seemed fine checked all gears after fluid added all good then i drove it down the road till about i think 35mph i think shifting out of 2nd it slips and revs with overdrive on and stays in gear with overdrive off. i hook my scanner up to it and get codes. c1155 , c1145 , c1233 , c1234 , c1158 , c1148 , c1226 , p1000 4 codes are for the front wheel speed sensors i replaced both on the front erased the codes but they still come back . i took it to a local transmission shop for them to hook their scanner up to it but they are not getting a reading from the trans

1 Answer


Jimm 10/8/2019

Okay - is there any question in this detail?


Answer this question

( characters left)

Follow Question

what's this?