Auto Answers » View Question
Tom

Tom 6/24/2010

1980 MG MGB MK IV 4 Cyl 1.8L

Brakes

Clunk in front when applying brakes.

I have replaced all the pads between the front cross member and the chassis, and the bushings at the inner ends of the lower A arms with new polyethelene pads and bushings, new bushings on the anti-sway bar, the wheel bearings are tight, and the swivel axles do not have excessive play, but I still occassionally get a clunk in the front when applying the brakes.

3 Answers


timmy

timmy 9/28/2011

did you check the calipers? pistons could have excessive play

Reply
0
Desert Racer

Desert Racer 9/28/2011

WOW.. AN MG.. Have not worked on one in years.. Check the motor mounts.. you sound like you know what you are doing.. So i won't explain it to you.. another unusual one .. make sure the radiator is bolted in tight.. Like Timmy said check to make sure the calipers are bolted tight.. From what I remember there were a lot of unusual problems with all the British cars.. When I had my shop, British cars (and saabs) were not allowed on the property. Its like the broke regularly and i just did not want the head ache of dealing with people who always had on going car problems..

Reply
0
Bill

Bill 9/29/2011

Make sure lug nuts tight and wheel bearings haven't slackened.

Reply
0

Answer this question

( characters left)

Follow Question

what's this?
advertisement
advertisement