» View Question
Autopart Mechanic

Autopa ... 5/30/2019

2013 Chevrolet Express 2500 LT 8 Cyl 6.00L


How I Troubleshoot a Slipping Clutch of my Car?

1 Answer

Partsavatar Carparts

The work of the clutch is a significant one. Disengage the clutch allows the driver to take the transmission out of gear and move it into a dissimilar one. Once the clutch starts to slip, the transmission will not fully slot in and the wheels will not take delivery of all of the power from the engine. This may make a grinding sound that is usually accompanied by vibrations, and, if not addressed, the slipping will likely get worse and could lead to serious damage and, eventually, total clutch failure.

Diagnosing a slipping clutch:

Step 1: Watch for issue related to how the clutch feels. The feel of the clutch will be the major indicator of its situation. It's not just how the clutch feels when it is engaged that is important; the way the vehicle responds to the clutch being disengaged is very important to diagnosing a slipping clutch as well.

Step 2: Exist on the lookout for less clear signs of a slipping clutch. If the clutch does not give great feedback, or if there are symptom with the car presentation but not with the clutch pedal itself, then it may be essential to use other indicators to found if the issue at hand is being cause by a slipping clutch.

• There is a noticeable loss in power when the vehicle is under heavy load, usually when towing or
travelling up a steep hill.

• If there is a on fire smell emanating also from the engine section or from beneath the car, then this may be an needle of a slip clutch causing excessive heat.
Servicing a slipping clutch:

Step 1: Check the clutch fluid level. The first obsession to check once it has been recognized that the difficulty is with the clutch is the level of clutch fluid in the clutch fluid reservoir. The fluid itself is the similar as brake fluid, and some car even have the clutch forbidden by the brake master cylinder.
No substance the arrangement, ensuring that the master cylinder scheming the clutch is not low on fluid will eliminate one likely basis of the problem. It never hurts to check.

Step 2: Get the car up to speed. Drive down the road, not in heavy traffic, and get the car travelling fast enough so that, in third gear, the engine is at a normal cruise RPM, usually around 2,000 RPM.

Step 3: Rev the engine and undo the clutch. Press in the clutch and rev the engine up to 4500 RPM or just to the point that it is revving obviously high, and then disengage the clutch. If the clutch is effective properly, then there will be an immediate drop in revs once the clutch is disconnected. If the drop is not immediate or if it is not noticeable at all then the clutch is probable slipping. This can be used as a very basic metric for determining the amount to which the clutch is slipping.


Answer this question

( characters left)

Follow Question

what's this?