How-to » Body & Interior » Interior, Heating & A/C » How to Replace a Blower Motor Resistor

How to Replace a Blower Motor Resistor

for the 2002 Dodge Durango SLT 4. Cyl 2.4L change

Note: This is a general guide and may not apply to your vehicle.

Parts
  • Blower Motor Resistor
Tools
  • Screwdriver
Difficulty

Easy

Edit Guide

Steps

Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.


1
Remove the negative battery terminal.
8021
2
Locate the blower motor resistor on the passenger side under the dash board. It is mounted to the the blower housing near the blower motor.
7266
7270
3
Disconnect the electrical connector to the blower motor resistor.
4
Remove the screws or bolts to the blower motor resistor and remove the resistor.
5
Installation is the reverse of the removal.
Help improve this guide!  Edit
Did you find this guide helpful? 

advertisement
 

Guide Contributors

  • ARZ at AutoMD.com
  • JAVY at AutoMD.com
  • bill.oldsen@gmail.com at AutoMD.com
  • Help improve this guide and be a top contributor!
 
advertisement