» » » How to Replace a Turn Signal Bulb

How to Replace a Turn Signal Bulb

for the 2000 Nissan Pathfinder SE 16 Cyl 7.1L change

Note: This is a general guide and may not apply to your vehicle.

Parts
  • Light Bulb
Tools
  • Screwdriver
Difficulty

Easy

Edit Guide

Steps

Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.



1
Place the ignition key in the on position.
2
Activate your turn signal switch.
6558
3
Locate the burned out turn signal bulb.
5727
4
Turn the ignition key to the off position.
5
Gain access to the turn signal bulb.
6
Remove the turn signal bulb socket from the lens assembly.
7
Disconnect the turn signal bulb from the socket.
8
Install the new turn signal bulb.
9
Reconnect the socket to the lens assembly.
10
Place the ignition key in the on position. Activate the turn signal switch to verify the repair.
Help improve this guide!  Edit
Did you find this guide helpful? 

advertisement
 

Guide Contributors

  • ARZ at AutoMD.com
  • Help improve this guide and be a top contributor!
 
advertisement