» » » How to Replace a Step Bumper

Note: This is a general guide for all vehicles.

How to Replace a Step Bumper

Select Vehicle
Advertisement
Advertisement
Parts
  • Step Bumper
Tools
  • Drive Socket
Difficulty

Moderate

Edit Guide

Steps

Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.

1
Locate your rear step bumper.
2
Inspect your rear step bumper for damage.
53251
3
Remove your damaged rear step bumper from its mounting brackets.
53252
53253
4
Remove any components attached to the step bumper. This may or may not include a license plate, tow hitch, lights or trim pieces.
53254
53255
53256
5
Temporarily install the new step bumper to ensure that it is the correct replacement part.
6
Attach the new step bumper to the mounting brackets and torque the mounting bolts to the manufacturer's specifications.
7
Reattach all of the components that were removed from the old bumper onto the new bumper.
53257
8
Inspect the new rear step bumper for proper alignment and installation.

Car Problems?

Find a Shop

near you!

Advertisement
Advertisement
Help improve this guide!  Edit
Did you find this guide helpful? 
Advertisement
Advertisement

Advertisement
 

Guide Contributors

  • my_ynoh at AutoMD.com
  • Help improve this guide and be a top contributor!
 
Advertisement

Car Problems?

Find a Shop

near you!