» » » How to Replace a Side Marker Light Assembly

How to Replace a Side Marker Light Assembly

Select Vehicle

Note: This is a general guide for all vehicles.

Parts
  • Side Marker
Tools
  • Screwdriver
Difficulty

Easy

Edit Guide

Steps

Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.

1
Locate your side marker light assemblies.
6059
2
Inspect the side marker light assemblies for damage.
3
Gain access to the side marker light. Depending on your vehicle and which marker light assembly you need to replace you may need to open the hood, trunk or access the assembly from underneath the vehicle.
4
Remove the bulb and socket from the side marker lens assembly, a counterclockwise twisting motion usually will allow you to pull the socket out of the lens.
6057
5
Unbolt or unscrew the side marker light assembly from the vehicle and remove the damaged assembly.
6055
6
Install new side marker light assembly on the vehicle.
7
Reinstall the side marker light bulb and socket into the lens.
8
Test the operation of the side marker light assembly to verify your repairs.
6053
Help improve this guide!  Edit
Did you find this guide helpful? 

advertisement
 

Guide Contributors

  • my_ynoh at AutoMD.com
  • Help improve this guide and be a top contributor!
 
advertisement