» » » How to Replace a Window Motor

Note: This is a general guide for all vehicles.

How to Replace a Window Motor

Select Vehicle
Advertisement
Advertisement
Parts
  • Window Motor
Tools
  • Continuity Tester
  • Screwdriver
  • 1 more tool
Difficulty

Moderate

Edit Guide

Steps

Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.

1
Locate the power window fuse and inspect to determine if it is blown.
2
Using the door panel window switch, roll the window up and down.
3
Remove the interior door panel.
53528
53531
53368
4
Check the window lift motor connector.
5
With the power probe, verify power to the positive side connector pin on the window lift motor.
53529
6
Remove the glass from the regulator assembly.
7
Tape glass to door frame.
8
Remove the window lift motor mounting bolts. Slide the window lift motor mount through the interior access opening of the door.
9
Install the new window lift motor and tighten the mounting bolts.
53532
10
Reconnect the window lift motor connector.
11
Re-install the vapor barrier.
12
Re-install the door trim panel and handles/switches.
13
Test the power window for proper operation by rolling the window up and down in complete cycles for proper testing.

Car Problems?

Find a Shop

near you!

Advertisement
Advertisement
Help improve this guide!  Edit
Did you find this guide helpful? 
Advertisement
Advertisement

Advertisement
 

Guide Contributors

  • my_ynoh at AutoMD.com
  • Help improve this guide and be a top contributor!
 
Advertisement

Car Problems?

Find a Shop

near you!