» » » How to Replace a Power Window Switch

Note: This is a general guide and may not apply to your vehicle.

How to Replace a Power Window Switch

for the 2007 Nissan Pathfinder SE 6 Cyl 14.8L change
  • Interior Trim Kit
  • Window Switch
  • Screwdriver
  • Multimeter


Edit Guide


Safety Tip: Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
Inspect fuse box for faulty / open fuses. Fuse box locations can be found in the vehicle owner's manual.
Remove the power window switch from the door panel. 6486
Depending on your make and model - you may need to remove the door panel to access the cabling for the switch. You can easily remove the door panel by unclipping the handles and switches with a screw driver. As you remove components from the door be cautious of items that may be secured with additional screws. If it feels like you are having to use a lot of force to free it, there is most likely a screw or locking clip securing it. Take your time and inspect how each piece is secured in place. 6488
Install new power window switch into the door panel..
Reconnect power window switch. Test the window and switch operation before installing the door panel.
Reinstall door panel and power]
Help improve this guide!  Edit
Did you find this guide helpful? 


Guide Contributors

  • ARZ at AutoMD.com
  • Jimm at AutoMD.com
  • Ray at AutoMD.com
  • Help improve this guide and be a top contributor!