Auto Answers » Transmissions & Drivetrains » Mercury » Page 7

Mercury transmissions & drivetrains repair questions and answers

Post your Mercury transmissions & drivetrains question or share what you know by answering questions

Browse Mercury Categories

323 Questions
Sort by:
  • 16y/o w/car
    16y/o w/car - 1991 Mercury Capri - Transmissions & Drivetrains - 8/19/2012
    I bought an old 1991 mercury capri that will shift when the cars not running but wont shift while its running?
     
    0 answer
  • liz
    liz - 1991 Mercury Capri - Transmissions & Drivetrains - 8/13/2012
    Wher to find a transmission motor mount (front) or is there another that would fit.?
    The bushing is worn out , is there an alterative to replacing mount ?
     
    • Jimm
      8/13/2012 Jimm
      Try the many on-line auto parts sources, such as; www.RockAuto.com, www.autopartswarehouse.com, or www.bulkpart.com for the replacement parts. For example, they (Bulk Part) list the replacement front transmission mount for around $5.00 - depending on the type of trnsmission; manual or automatic - for your vehicle.
      Jimm
      8/14/2012 liz
      Thanks..I am checkin those sites now.
  • liz
    liz - 1991 Mercury Capri - Transmissions & Drivetrains - 8/13/2012
    Wher to find a transmission motor mount (front) or is there another that would fit.?
    The bushing is worn out , is there an alterative to replacing mount ?
     
    • Jimm
      8/13/2012 Jimm
      Try the many on-line auto parts sources, such as; www.RockAuto.com, www.autopartswarehouse.com, or www.bulkpart.com for the replacement parts. For example, they (Bulk Part) list the replacement front transmission mount for around $5.00 - depending on the type of trnsmission; manual or automatic - for your vehicle.
  • TitiBebbs
    TitiBebbs - 2002 Mercury Mountaineer - Transmissions & Drivetrains - 8/12/2012
    I know my transmission clutch is bad, but my car has started rattling badly. It is less when I drive slower.
    Will my car fall apart?
     
    0 answer
  • kgall588
    kgall588 - 1999 Mercury Mystique - Transmissions & Drivetrains - 8/11/2012
    Car lunges at freeway speeds.
    Once I get up to 60-70 mph the car feels like I am letting off the gas and then slamming back down on it and it lunges forward. The longer you drive on the highway the stronger it does it. The mass air flow sensor has been replaced, and a Ford dealership thought it ...
     
    • Jimm
      8/11/2012 Jimm
      First step - have the OBD (on-board diagnostic) system checked for any stored fault codes. The issue may be related to the lock-up torque converter or torque converter control solenoid.

      Check the many on-line auto parts sources, such as; www.RockAuto.com or www.autopartswarehouse.com for the replacement parts.
  • Joe
    Joe - 1999 Mercury Villager - Transmissions & Drivetrains - 8/7/2012
    Can a bad distributor cause the Villager to go into limp mode or fail safe mode?
    We replaced the distributor a year ago and now we are having surging issues.
     
    0 answer
  • Joe
    Joe - 1999 Mercury Villager - Transmissions & Drivetrains - 8/7/2012
    Villager is in limp mode. Will not upshift to the higher gears while in drive.
    117000 miles. Check engine light is on. The only code we get is the throttle position sensor which has been replaced three times. We have changed the transmission fluid and filter.
     
    0 answer
  • brad
    brad - 2006 Mercury Mariner - Transmissions & Drivetrains - 7/28/2012
    Car runs 2200 rpm @ 40mph get 13mpg. Then changes on own to 1500rpm @ 40mph. Get 33mpg. Why?
    No a/c being used. No check engine lights.
     
    • Jimm
      7/28/2012 Jimm
      The actual mileage is a variable, and will vary based on; driving conditions, road conditions, traffic, engine health (state-of-tune), wind, elevation, road incline, wheel alignment - and other factors. It may be what you are describing is the MPG readout on the instrument panel? If all conditions are OK - no driveability or performance issues - such as no engine warning lights - then this is normal.
      The lower engine RPM at certain speeds is governed by the transmission - whether in overdrive or not. When in overdrive gear, the engine turns over less speed (less RPMs) to increase fuel mileage and decrease engine wear.
  • bernard
     
    • Jimm
      7/28/2012 Jimm
      You may try the local auto salvage sources in your area. You may also try the many on-line auto parts sources, such as; www.autopartsfair.com, www.usedpartslive.com - to name just a couple.

      Here are the Ford part numbers - which one to purchase will depend on the vehicle and application. There was also a recall for the wiring harness - check the AutoMD website for further details for Recall 01V230000 .

      F6RZ-14K289-S6MC 96-97 2.5L Manual Trans With MECA II with ABS
      F6RZ-14K289-S6MD 96-97 2.5L Manual Trans With MECA III with ABS
      F6RZ-14K289-S6MA 96-97 2.5L Manual Trans no ABS
      F6RZ-14K289-S6AC 96-97 2.5L Auto Trans With MECA II with ABS
      F6RZ-14K289-S6AD 96-97 2.5L Auto Trans With MECA III with ABS
      F6RZ-14K289-S6AA 96-97 2.5L Auto Trans no ABS


  • mjan
    mjan - 1999 Mercury Sable - Transmissions & Drivetrains - 7/22/2012
    My transmission hose is broken and I need to know where to look to find a diagram to learn how to fix it or chsnge it?
    My transmission hose broke and fluid leaked out . I need to get pictures on how to change it?
     
    • Jimm
      7/22/2012 Jimm
      Need more information - is this the flexible rubber transimission hose, or the rigid transmission line or tubing that is leaking? The repair is similar - only less time and cost with the flexible hose.
      Try the 'How-To-Guides' feature on the AutoMD website - or you may try the repair guides found at this website; www.autozone.com.
      Jimm
      7/22/2012 mjan
      Thank you for your answer. It is the rubber hose I believe
  • joe marcucci
    joe marcucci - 2001 Mercury Grand Marquis - Transmissions & Drivetrains - 7/21/2012
    Change rear oil seal rear end
     
    0 answer
  • Devan
    Devan - 1993 Mercury Tracer - Transmissions & Drivetrains - 7/19/2012
    Problem with wiring from tail lights to trans control module. Lights on it thinks the brakes are applied and downshifts
    Vehicle has 188,888, everything works great except this one issue. I have been able to replace just bulbs in the past and have it work fine, but lately it started again and changing bulbs has not worked. I replaced the bulb socket assembly for both left and right ...
     
    0 answer
  • cowboy32563
    cowboy32563 - 1995 Mercury Cougar - Transmissions & Drivetrains - 7/18/2012
    Automatic Transmission shutters when changing gears?
    Automatic. Transmission shutters when changing gears
     
    0 answer
  • Getmoneymadness
    Getmoneymadness - 1997 Mercury Grand Marquis - Transmissions & Drivetrains - 7/14/2012
    I have an video explaining what happened after I added brake fluid to the master cylinder and now my car won't shift.
    I have an video explaining what happened after I added brake fluid to the master cylinder and now my car won't shift. I need anyone's help in what I should do next. Thanks
     
    • Jimm
      7/14/2012 Jimm
      Adding brake fluid to the brake master cylinder does not affect the transmission or the shifting. The hydraulic brake system is separate from the transmission.
      Can you provide more specific detail about the issue you are having?
  • mike1965
    mike1965 - 1997 Mercury Mountaineer - Transmissions & Drivetrains - 7/14/2012
    Transmission seems to be between gears
    When put in neutral seems to want to go forward
     
    • Jimm
      7/14/2012 Jimm
      You may have a bad shift cable or one out of adjustment, in which case the shifter may be in park on the dash, but on the transmission may be in between park and reverse. What you need to do is put it in park, and disconnect the shifter cable at the transmission...see if the linkage on the transmission further moves into the park position. Once adjusted for the correct Park position, then the Neutral position should be OK.