Auto Answers » Body & Interior » Mercury » Page 8

Mercury body & interior repair questions and answers

Post your Mercury body & interior question or share what you know by answering questions

403 Questions
Sort by:
  • Jawan P.
    Jawan P. - 1992 Mercury Grand Marquis - Body & Interior - 7/26/2012
    My key is stuck in the ignition, how do I get it out?
    I turn it, try and pull it out, yak at it but its stuck!
     
    0 answer
  • Carl
    Carl - 1999 Mercury Sable - Body & Interior - 7/19/2012
    A/c blows out hot air,blend door can be move by hand.how can i check for power from plug?is there a relay or fuse for it
    replaced blend door accumalator,twice.door can be opened by hand.dont think its getting power at plug.
     
    • HouseCallAuto
      7/19/2012 HouseCallAuto
      I have to know which system is in this car as there were two. One is called Electronic Automatic Temperature Control (EATC) which is the optional fancy system with electronic display or it has the regular manual heating and a/c system.
      HouseCallAuto
      7/19/2012 Carl
      its the fancy one.The EATC
      HouseCallAuto
      7/19/2012 Carl
      hello.it has the EATC system
      HouseCallAuto
      6/26/2013 Carl
      car+has+A+light+that+flashes+on+dashboard.Its+a+picture+of+a+steering+wheel+with+a+padlock+and+a+number+1+in+the+padloc
      HouseCallAuto
      6/26/2013 Carl
      08+BMW+328I.Problem-Lite+on+dashboard.+a+picture+of+a+steering+wheel+with+a+padlock+and+a+%23+1.car+won%27t+start
    • HouseCallAuto
      7/19/2012 HouseCallAuto
      1. Perform the self test on the EATC control head. If there are any memory codes still in the system, the system will not function as it should unless the codes are cleared.

      2. To enter the self-test, press the OFF and FLOOR buttons simultaneously and then press the AUTOMATIC button within two seconds. The display will show a dashed line in the center of the display window. The test may run as long as 30 seconds. Record all DTCs displayed.

      3. To exit self-test and clear all DTCs, press F-Defrost button. The vacuum fluorescent display window will show 888 and all function symbols for one second. Then, the EATC system will turn OFF (display blank) and all DTCs will be cleared.
      HouseCallAuto
      7/20/2012 Carl
      hello.sorry i didnt get back to you sooner.Just got in.took family to see Batman.GREAT MOVIE!!!Thank you,Thank you,Thank you.running self test worked.the ford place told me to try two things(of which,1 i had to buy).TOP NOTCH HOUSE, CALL AUTO.AAAttttttt.Thanks again
    • Carl
      7/19/2012 Carl
      its the fancy one.the eatc
  • jamieallen71404
    jamieallen71404 - 2004 Mercury Grand Marquis - Body & Interior - 7/13/2012
    03 grand marquis
    Blows cold but only thru defrost vents, control head works ok and I can't find any leaks
     
    0 answer
  • motorcyclemom
     
    • jdl
      7/8/2012 jdl
      I haven't looked at your seat wiring. Is the seat back electrical? If so, that is where i would start checking. In the past, on different makes and models, I have found a metal part of the seat frame broken. I took the seat out and welded it back together, reinstalled, it worked ok. In the past on different makes and models, I have swapped out the driver seat with the passenger seat. I worked ok. Is that the proper fix? no, but it might get you out of a bind.
  • Deb
    Deb - 2008 Mercury Sable - Body & Interior - 7/7/2012
    How to change auto trunk hydraulic struts
    Trunk hydraulics no longer open or hold trunk up
     
    • Jimm
      7/7/2012 Jimm
      Fairly simple task - they will pop off using a flat blade screwdriver. Try the 'How-To-Guides' feature on the AutoMD website for the specific steps.
  • DANIEL
    DANIEL - 2000 Mercury Mountaineer - Body & Interior - 7/6/2012
    WHY DOES MY LIGHT NOT COME ON WHEN I OPEN DRIVER SIDE DOOR?
    ALL OTHER DOORS WORK BUT THE DRIVERS SIDE DOOR DOES NOT.
     
    • Jimm
      7/6/2012 Jimm
      Several possibilities; faulty door lamp, faulty door switch, faulty / corroded wiring or connection.
  • Ken
    Ken - 2006 Mercury Mountaineer - Body & Interior - 6/29/2012
    How Do I Remove & Then Replace Damaged Front Bumper
    Front bumper is cracked and damaged and needs replacement.
     
    0 answer
  • cougar
    cougar - 1985 Mercury Cougar - Body & Interior - 6/26/2012
    Where is the ac orifce tube?
    not located at evaporator hose conection.
     
    • Jack
      6/26/2012 Jack
      In the evaporator tube where the high side a/c line (smaller line) enters the Evaporator core. You will need to carefully pull it out with needle nose pliers after discharging the system of refridgerant. If it has any metal in it , you will need to replace the compressor and clean out the complete system. Jack.
    • RC
      6/26/2012 RC
      If it's original, it is part of the metal line (three indented notches). They have a replacement kit
  • Jacob
    Jacob - 2003 Mercury Mountaineer - Body & Interior - 6/23/2012
    The dirivers side front and back power windows will not operate. I changed the master power switch but that didn't help
    I check for broken wires in the door and could not find any. I am getting power to the switch and the ground is good. I have power down to the connector for the motor. I connected the motor directly to the battery and it did not work. I think it is the motor. I ...
     
    • HouseCallAuto
      6/23/2012 HouseCallAuto
      Not a DIY job if you never did one before. the regulator has to be removed first. This requires drilling out the regulator to glass rivets (yes rivets, special ones too) then requires removing the glass from the door and then the regulator. Other regulator rivets have to be drilled out as well. Have a pro do it.
      HouseCallAuto
      6/25/2012 Jacob
      Thanks. I thought I could just remove the window motor by removing the three bolts that hold it and replace the motor without removing the regulator.
  • Art Humphrey
    Art Humphrey - 1995 Mercury Sable - Body & Interior - 6/19/2012
    Front windshield washer dos'nt work
    Need to know which replacement modle to order from JCW. Any guidance for instalation would be helpful. Thank you, Art
     
    0 answer
  • mgbg2012
    mgbg2012 - 1997 Mercury Grand Marquis - Body & Interior - 6/18/2012
    AIR BAG LIGHT IS ON, HOW DO I GET IT TO GO OUT ?
    I GOT IN A WRECK AND THE AIR BAGS DID NOT DEPLOY. BUT THE AIR BAG LIGHT CAME ON, HOW AND WHAT DO I DO TO GET IT TO GO OFF ?
     
    • raoul_tiesto
      6/18/2012 raoul_tiesto
      If the airbag light its on u may have a fault code in the airbag system.U need to connect the vehicle to a scanner to find out why the light its on.
  • bnores
    bnores - 1996 Mercury Cougar - Body & Interior - 6/13/2012
    No turn signals, brake lights, cruise control
    I replace the turn signal lever switch but still no work
     
    0 answer
  • wilko
    wilko - 1993 Mercury Capri - Body & Interior - 6/6/2012
    Can i replace a two holes door switch by a one hole door switch?
    a door switch is the device that puts on/off the interior lights as the doors go open/ closed
     
    • CVO
      6/6/2012 CVO
      The door has two cavities, one for the switch and the other for speaker wiring. If one of them is no use, of course you could replace with the one hole door switch.
      CVO
      6/6/2012 wilko
      Are they ecactly the same? (only that the onehole sw. has one hole and a boot)
      CVO
      6/6/2012 CVO
      Call the vendor.
  • Blazinjessejames
    Blazinjessejames - 1999 Mercury Grand Marquis - Body & Interior - 6/4/2012
    How hard would it be to replace quarter panels on a 1999 grand marquis?
    I want to pay thousands less if I can complete this job. Front pass. is crumpled but not frame damage. Rear pass. panel.
     
    0 answer
 
AutoMD Verified Customer
AutoMD obtained proof this customer interacted with the shop.