Auto Answers » Body & Interior » Mercury » Page 22

Mercury body & interior repair questions and answers

Post your Mercury body & interior question or share what you know by answering questions

395 Questions
Sort by:
  • Larry G. Beaudrot
    Larry G. Beaudrot - 2008 Mercury Grand Marquis - Body & Interior - 12/9/2010
    Dome lights want go off
    I replace the right door handle after doing body repairs to the car. Could this keep the dome lights from going off. I hooked the harness plug back up, but was told this car has a electrical wire going to the latch with a switch and if I've move the wire ...
     
    • Nissan Technical Advisor
      There’s something wrong with the electrical wiring. Perhaps there’s a wrong installation (wire grounded or open). The wiring should be examined using a voltage tester.
  • Sandra
    Sandra - 2001 Mercury Sable - Body & Interior - 12/7/2010
    Seat Problem - Won't move up
    I have a 2001 Mercury Sable. Yesterday, when trying to adjust the seat to move forward I get a grinding noise like the motor under the seat has gone out. It won't slide up... only to a certain point then the seat starts clicking. However when I place in reverse to ...
     
    • yboy82
      12/7/2010 yboy82
      You have to check your seat motor or its switch to be able to identify the fault and you can also use the Find a shop feature of AutoMD ( http://www.automd.com/shops/) to see a list of shops near your with their address, telephone number and labor rate per hour. You can also browse the TSB’s (98) of your vehicle on this link http://www.automd.com/recall-tsb/search/

      2001 Mercury Sable Seats Service Bulletin 274514
      NHTSA: Action Number: 616839 Service Bulletin Number: 274514

      •Report Date:
      Dec 01, 2000

      •Component:
      Seats

      Summary: Some vehicles with power seats built after november 28th, 2000 will not be equipped with plastic seat track trim covers installed on the front inboard side of the seat track. The inboard seat track trim covers have been discontinued.
  • david
    david - 2000 Mercury Villager - Body & Interior - 12/3/2010
    When i turn the heater it smells like antifreeze
     
    • I am the Hammer
      12/3/2010 I am the Hammer
      You Have a bad heater core. It is leaking internally. Check for wetness inside on the floor or pressure check the cooling system
  • sherwood
    sherwood - 1997 Mercury Grand Marquis - Body & Interior - 12/2/2010
    How to fix my vents so air can flow from not only the floor vent but all vents including the defrost
    heating core was replaced when the control is in the cold position i can feel some but not much air coming for the vents but when i turn the control to the heat i can only feel some air coming from the floor vent
     
    • tnharpman
      12/2/2010 tnharpman
      When was the heater core replaced? Were the vents working properly before this was done?
  • roach10
    roach10 - 1994 Mercury Villager - Body & Interior - 11/30/2010
    How do u fix the speedometer???
    cant tell what speed im going..
     
    • HouseCallAuto
      11/30/2010 HouseCallAuto
      You have to diagnose it first. It is either a bad speedometer or a bad speed sensor and they have equal failure rates.

      1. Check the output voltage of the speed sensor. With the vehicle on a hoist spinning the wheels in drive approximately 2-3 volts should be present on a lab scope.

      2. Check the signal at pin 32 at the speedometer.

      3. Check powers and grounds to the speedometer.

      Potential Causes:
      Speed Sensor
      Speedometer
  • Larry G. Beaudrot
    Larry G. Beaudrot - 2008 Mercury Grand Marquis - Body & Interior - 11/29/2010
    Cost to replace rear quarter panel
    What should be the cost of having a complete rear quarter panel replaced and painted on a 2008 Mercury Marquis. Also I painted trunk, roof, whole side of car. thanks Larry Beaudrot
     
    • Autobahn
      11/29/2010 Autobahn
      Quite pricey: $345.90 - $465.90 from Automotix.com (Shipped) add around $200 for the labor, that's the average price range but since yours is an 08 model, i doubt you will find it easy to find one.

      You can try your luck in:

      Autopartsfair.com

  • dkoenig
    dkoenig - 2002 Mercury Mountaineer - Body & Interior - 11/29/2010
    My odometer does not lite up anymore. Is this an easy fix and what should it cost to fix
     
    • justins1stchoice
      11/29/2010 justins1stchoice
      it is possible to fix this, you have to remove the gauge cluster. when you get it out you will see little black turn sockets that have no wires on them, those are your lights, twist them counter clockwise and pull them out, if they do not look burnt out then you may have a power/ground issue. removing the cluster can be time consuming, and tricky depending on your model, lots of screws and on some vehicles you have to remember which screw went in which hole, as some screws are longer than others. but someone with any kind of mechanical knowledge should be able to do this.
  • Ermel
    Ermel - 2004 Mercury Sable - Body & Interior - 11/25/2010
    Where can I buy the small halo bulb replacements for this car? Either 6 watt or 10 watt replacements.
    Chassis E65.....and bulbs are small bayonet type. Originals are Philips 12082 10 watt halogen bulbs. A suitable replacement of 6 watts or 10 watts is acceptable.
     
  • daves tools
    daves tools - 1995 Mercury Grand Marquis - Body & Interior - 11/24/2010
    Have no high beams, fuses,bulbs and multi switch good and relays good.
     
    • yboy82
      10/15/2010 yboy82
      Did you already check for battery voltage and ground at your headlight socket? If battery voltage is present check for proper ground (it is possible that the wire for your ground is disconnected).
      yboy82
      10/16/2010 daves tools
      Thanks I will give that a shot
    • Rangerdog
      11/16/2010 Rangerdog
      yboy82, I am experiencing same problem I was told it was my light control module! I don't know if your yr. and model
      came with one but I trying to locate one at this time 2005 Mercury Grand Marquis
    • yboy82
      11/24/2010 yboy82
      Hey Rangerdog you can post a question or create a thread here so that if one of the member here know or have an idea about your problem they will surely reply back at you
  • rick
    rick - 2002 Mercury Mountaineer - Body & Interior - 11/21/2010
    Power windows don't work
    I have checked the switch with one out of another mountaineer but thats not it. I was looking for the right fuse to check but none of them are marked and the fuse box says to check the owners manual for fuse ID, I don't have the owners manual but went to the mercury ...
     
    • HouseCallAuto
      11/21/2010 HouseCallAuto
      You likely have a broken ground wire inside the rubber boot where the window wiring goes out from the door by the door hinges.


      1. At the master window switch 8 terminal connector (C504a) check for a good ground on pin 2 Black (BK) wire. If the wire is not a good ground, repair as needed and recheck operation.

      2. If the ground is OK, verify the LB/BK wire maintains battery voltage when trying to operate the power windows.

      3. If there is battery voltage on the LB/BK wire when loading the circuit, check for battery voltage and ground between pin 7 Tan/Light Blue (TN/LB) and pin 8 White/Black (WH/BK) wire of C504a when commanding the driver's window down or up. If power and ground are not present between the wires but the power and ground to the switch are OK, suspect a faulty master window switch.
  • kinnerly
    kinnerly - 2001 Mercury Villager - Body & Interior - 11/14/2010
    The door handles on both sides have broken off. Can I purchase new handles to put on that will work? Neither door will
    The piece inside has broke, so neither door will open.
     
    • HouseCallAuto
      11/14/2010 HouseCallAuto
      You can buy new ones but the replacement parts need to be ordered from an authorized Ford / Lincoln Mercury dealer as these parts are not available aftermarket.
      HouseCallAuto
      11/14/2010 kinnerly
      Thank You
  • Hugh
    Hugh - 1986 Mercury Grand Marquis - Body & Interior - 11/10/2010
    Where is fuse box located, drivers power seat doesn't work, passenger does
     
    • HouseCallAuto
      11/10/2010 HouseCallAuto
      If the passenger side seat works then the fuse is good. The same fuse serves both seats. You may have a bad switch, a broken black ground wire off the switch. I do not think bad motors because the seat has 3 separate motors and they cannot all fail at once. verify that the BLACK / WHITE wire coming into the switch has 12 volts at all times or with the key on. verify that the BLACK wire coming off the switch is a good ground.
  • Bob
    Bob - 2008 Mercury Grand Marquis - Body & Interior - 11/7/2010
    The heater will not blow warm, cold air only. What could cause this?
    62,000 miles . Heater worked fine last year
     
    • Fox Hound
      11/7/2010 Fox Hound
      Ahhh, Blend door problem, its stuck. Usually this can be accessed through the GLove box or center console. The blend door is the size of a small notebook (black) that swivels left and right letting cold and hot air through. Or it can be the actuator is busted.

    • vince^_^
      11/7/2010 vince^_^
      Check your coolant level, if it is low top it off and bleed your cooling system if necessary (if possible check for leak in your cooling system if your engine coolant is low). Observe or check your coolant operating temperature, if it is below specification you should check your thermostat it may be stuck or damaged. Lastly check the condition of your heater control valve operation, heater control valve is used to control the flow of your coolant flow through the heater core. It is controlled by a cable or vacuum.
  • Darold
    Darold - 1997 Mercury Mountaineer - Body & Interior - 11/4/2010
    Third brake light assembly
    How do you replace third brake lamp
     
    0 answer
  • slashing
    slashing - 1998 Mercury Mountaineer - Body & Interior - 11/1/2010
    Air direction doesnt work air blows everywhere
     
    0 answer
 
AutoMD Verified Customer
AutoMD obtained proof this customer interacted with the shop.