GMC brakes repair questions and answers
Post your GMC brakes question or share what you know by answering questions
Browse GMC Categories
49 Questions
-
Just did my brakes now my abs traction control and brake lights come ondebbie - 2003 GMC Yukon Denali XL - Brakes - 1/8/2013Warning lights -
My ABS light comes on sometimes and brake pedal is noisy at slow to stop. What would cause this issue?cauman316 - 2006 GMC Sierra 1500 - Brakes - 1/4/2013Also when coming to a stop, my truck will not completely come to a stop. Desperate for an answer. -
What is causing my traction control to activate every time I come to a stop ? It also activates my abs light to turn onramos05 - 2005 GMC Yukon Denali - Brakes - 12/14/2012I feel loss of powe every time I take off from a complete stop -
My ABS light goes on and off and my brakes sometimes grind when coming to a stop.frederick.smith84 - 2006 GMC Sierra 1500 - Brakes - 12/8/2012I had my brakes changed about 2 months ago and now my ABS light is going off and on. Also when I am traveling at pretty slow speeds my brakes sometimes make a grinding noise and it feels like my brakes are slipping a little bit. Any ideas? -
My ABS light goes on and off and my brakes sometimes grind when coming to a stop.frederick.smith84 - 2006 GMC Sierra 1500 - Brakes - 12/8/2012I had my brakes changed about 2 months ago and now my ABS light is going off and on. Also when I am traveling at pretty slow speeds my brakes sometimes make a grinding noise and it feels like my brakes are slipping a little bit. Any ideas?
-
I just replaced my pads and rotors and bled my brakes been about a week and there still squishygorillamenmovers - 1997 GMC K1500 Suburban - Brakes - 12/5/2012 -
What is causing my truck to idle down when applying the brakes?a.ralston06 - 1999 GMC Yukon - Brakes - 11/20/2012sitting in park i apply the the brake and my engine drops idle speed from around 700 to about 4... the harder i apply, the lower it drops. what could it be?
-
What is causing my truck to idle down when applying the brakes?a.ralston06 - 1999 GMC Yukon - Brakes - 11/20/2012sitting in park i apply the the brake and my engine drops idle speed from around 700 to about 4... the harder i apply, the lower it drops. what could it be?
-
When use the brake my truck hesitates to stop and I hear a grindingcheandrews60 - 2005 GMC Sierra 1500 - Brakes - 11/12/2012160 000 kms. all the time when using brakes I disconnected a wheel sensor (I think) and it didn't happen again until I reconnected it a code reading was done the machanic said he got 2 readings but couldn't tell what was the problem he said it could be electrical ... -
Replacing brake pads, having trouble putting spacers back in place, what do I need to do?donaldjamison31 - 1992 GMC Sonoma - Brakes - 11/4/2012
-
My front disc brakes have spacers on them and I am having trouble getting them to fit. What am I doing wrong?donaldjamison31 - 1992 GMC Sonoma - Brakes - 11/4/2012
-
Why brake light wont work and running brake light (tailgate lights wont work)duckhunters84 - 1991 GMC Sonoma - Brakes - 10/28/2012brake light wont come on when press pedal, when i turn headlight on the running light wont come on, when i turn signal on it become 4 way flasher, i have replaced all lightbulbs and check fuse and check switch.. when i put it in rev the rev white light dont come on ...
-
I apply brakes and rear wheel still pulls during application. Any ideas why this might be?Paul - 1993 GMC Sonoma - Brakes - 10/16/2012
-
Replacing brake rotors and im trying to find the toqure spec for the alxe bolt on rotornoman - 1995 GMC C7000 Topkick - Brakes - 9/18/2012
