Auto Answers » Transmissions & Drivetrains » Chrysler

Chrysler transmissions & drivetrains repair questions and answers

Post your Chrysler transmissions & drivetrains question or share what you know by answering questions

Browse Chrysler Categories

539 Questions
Sort by:
  • TalkToTangee
    TalkToTangee - 2008 Chrysler Sebring - Transmissions & Drivetrains - 11/15/2014
    Can use reverse with no problem--when put in drive engine shuts down
    96,000...first time problem-no previous work, oil is a quart low...rpm's did not seem to move when odometer showed over 65 mph but the rpm's did not reflect speed. Have not checked transmission fluid--engine light NOT on
     
    0 answer
  • jj
    jj - 1999 Chrysler Sebring - Transmissions & Drivetrains - 11/12/2014
    Transmission not shifting after alternator failure
    I had an alternator completely fail in my sebring. Jumped it several times to get it to a repair shop. Each time the car bucked and lost power while getting it to the shop. Alternator was replaced and the car started up fine but while driving it home the check ...
     
    0 answer
  • jj
    jj - 1999 Chrysler Sebring - Transmissions & Drivetrains - 11/12/2014
    Transmission not shifting after alternator faiure/
    I had an alternator completely fail in my sebring. Jumped it several times to get it to a repair shop. Each time the car bucked and lost power while getting it to the shop. Alternator was replaced and the car started up fine but while driving it home the check ...
     
    0 answer
  • Oscar
    Oscar - 1991 Chrysler LeBaron - Transmissions & Drivetrains - 11/1/2014
    No reverse on auto button on gear selector doesn't pop up when in reverse
    Hi My Lebanon has no reverse all other gears are fine , when I put it in any other gear the button on top pops up but when I put it in reverse it doesn't pop up All help greatly appreciated
     
    • alex
      11/1/2014 alex
      get a can of electrical contact cleaner and clean it out just spray and wiggel the buttons more than likley something got spilled or stuck in there and just needs cleaned back out.
  • Candie
    Candie - 2007 Chrysler Aspen - Transmissions & Drivetrains - 10/15/2014
    Why does my truck downshift hard?
    when slowing down or stopping (applying breaks or coasting), when it downshifts around 40-45 mph, it shifts really hard, making a 'clunking' sound & truck jerks
     
    0 answer
  • Candie
    Candie - 2007 Chrysler Aspen - Transmissions & Drivetrains - 10/15/2014
    Hard downshift when slowing or stopping, around 40-45mph
    when slowing down (applying break or coasting), vehicle gets around 40-45 mph & downshifts very hard. loud noise & you can feel the truck jerk
     
    0 answer
  • Lgravy
    Lgravy - 2006 Chrysler Pacifica - Transmissions & Drivetrains - 9/29/2014
    What's the deal with my car? Scary!
    I have a 2006 Chrysler Pacifica with about 108,500 miles. Three times in the last month, I have had this happen...where it sounds and feels like I hit a small dog. The first time it did it was when I pulled into a four lane from the grocery store parking lot, the ...
     
    0 answer
  • leroy
    leroy - 1993 Chrysler LeBaron - Transmissions & Drivetrains - 9/20/2014
    Car has a automatic transmission when you put it in drive the car wont move
     
    • Jimm
      9/20/2014 Jimm
      If the fluid level is OK; still slips / does not engage - then no easy fix. Most likely the transmission bands / friction surfaces are worn and need replacement. This means either a transmission overhaul / rebuild or replacement.

      Check the various on-line vendors; www.autopartswarehouse.com, www.RockAuto.com, www.partsgeek.com, to list only a few. For example, they (RockAuto) list the transmission (rebuilt) from around $780.00 (minus core exchange and minus labor), and the transmission rebuild kit from around $60.00 for your vehicle.
  • leroy
    leroy - 1993 Chrysler LeBaron - Transmissions & Drivetrains - 9/20/2014
    Car has a automatic transmission when you put it in drive the car wont move
     
    • Jimm
      9/20/2014 Jimm
      If the fluid level is OK; still slips / does not engage - then no easy fix. Most likely the transmission bands / friction surfaces are worn and need replacement. This means either a transmission overhaul / rebuild or replacement.

      Check the various on-line vendors; www.autopartswarehouse.com, www.RockAuto.com, www.partsgeek.com, to list only a few. For example, they (RockAuto) list the transmission (rebuilt) from around $780.00 (minus core exchange and minus labor), and the transmission rebuild kit from around $60.00 for your vehicle.
  • durango38
    durango38 - 2008 Chrysler PT Cruiser - Transmissions & Drivetrains - 9/9/2014
    Wont shift into reverse
    150000 miles
     
    • alex
      9/9/2014 alex
      does it feel weak or slipping in drive reverse is the first to go. check you transmission fluid it should be red and smell the same as power steering fluid. if it is still clean a solenoid or the trans controller went out. if it is dirty you lost something internal and will need rebuilt.
  • amy Espinoza
    amy Espinoza - 2005 Chrysler PT Cruiser - Transmissions & Drivetrains - 9/8/2014
    What happened I was putting my pt cruiser into park there was a popping noise and now it doesn't want to change gears
    Prior to this it was hard to shift
     
    0 answer
  • LORD HELMET
    LORD HELMET - 1999 Chrysler Town & Country - Transmissions & Drivetrains - 9/6/2014
    Transmission limp mode
    After three rebuilds (and one court case after a lousy rebuild), tranny still goes into limp mode shortly after beginning travel at highway speeds. Once we pull off, turn off engine and wait 5 or 10 minutes, then it's okay for the rest of the trip (usually). Any ...
     
    0 answer
  • chevy87
    chevy87 - 2001 Chrysler PT Cruiser - Transmissions & Drivetrains - 8/29/2014
    PTcruiser Transmission stop pulling.
    driving down the road my tranmission stop pulling . an then start to make a loud sound, car start to go again , transmission stop pulling again. transmission stop pulling start pulling .on and off, and then the check Engine light come on. what can it be? please ...
     
    0 answer
  • J
    J - 1996 Chrysler Concorde - Transmissions & Drivetrains - 8/18/2014
    Hey, I have a 96 Chrysler Concorde V6 3.3L engine. Automatic. Recently I have been having problems with the gear shiftin
    Last time it was driven it would not switch gears had to stay at certain speed limit
     
    0 answer
  • J
    J - 1996 Chrysler Concorde - Transmissions & Drivetrains - 8/18/2014
    Hey, I have a 96 Chrysler Concorde V6 3.3L engine. Automatic. Recently I have been having problems with the gear shiftin
    Last time it was driven it would not switch gears had to stay at certain speed limit
     
    0 answer