Auto Answers » Body & Interior » Chrysler » Page 7

Chrysler body & interior repair questions and answers

Post your Chrysler body & interior question or share what you know by answering questions

824 Questions
Sort by:
  • mattz555
    mattz555 - 1999 Chrysler Concorde - Body & Interior - 3/15/2013
    Factory Alarm Location
    I am installing a DEI 508D which has power+, ground-, and 2 alarm wire-. Only wire I could find with the factory alarm is 1 orange+ wire. Need help finding out how to set up this build.
    0 answer
  • dcessnap
    dcessnap - 2007 Chrysler Sebring - Body & Interior - 3/14/2013
    How to remove console
    0 answer
  • a.partipilo52787
    a.partipilo52787 - 1989 Chrysler LeBaron - Body & Interior - 3/12/2013
    Why do my gauges stick when turning the car off
    when I shut the car off my gauges will stick to 20 rpms and my tachometer will stick to 5mph untill I reinsert the key and turn it to to start the car up
    0 answer
  • oliver1695
    oliver1695 - 2005 Chrysler 300 - Body & Interior - 3/8/2013
    My pasenger side airbag light keeps going off
    when i hit a bump in the street my pasenger side airbag light will read pasenger side airbag off and then it will read its on what could be causeing this problem
    0 answer
  • johnsmarteljr
    johnsmarteljr - 2006 Chrysler Pacifica - Body & Interior - 3/7/2013
    Fan Assembly Is Very Loud...
    I Just Recently Bought My Fan Assembly About 30 days Ago From PartsGeek And The Motor Is Very Loud So I Reach Out To Them And They Were Willing To Give Me A Refund But I Threw Out My Original One And The Box It Came In So Iam Taking A Lost On That...Anyway Iam ...
    • HouseCallAuto
      3/7/2013 HouseCallAuto
      If you want it to be exactly as the original one, buy it from the dealer but it will cost much more money. Dorman products are good mostly, but sometimes I too have a problem with a Dorman piece.
  • h.katina
    h.katina - 1994 Chrysler Town & Country - Body & Interior - 3/5/2013
    What is wrong when odometer reading or fuel status will not show on instrument cluster nor mini computer?
    The only thing that shows a reading on the cluster panel is the battery status. The cluster lights up, but does not show mileage, odometer, or fuel status
    • CVO
      3/5/2013 CVO
      Try this, do a powertrain control module reset by disconnecting both battery terminals for half an hour and rubbing each other terminals for a few minutes prior for the re-installation. It might restore the instrument clusters. That trick worked on my 92 Dodge Caravan 3.0. Hope this helps.
      Note: if that doesn't worked, an instrument clusters or the powertrain control module might involve.
  • michael johnson
    michael johnson - 2001 Chrysler Concorde - Body & Interior - 2/27/2013
    Head lights and interior lights won't come on
    The head lights and inside lights won't come on
    0 answer
  • tadams46
    tadams46 - 2005 Chrysler PT Cruiser - Body & Interior - 2/24/2013
    Seat belt locking clasp drops to floor making it difficult to reach. How do we resolve?
    Two-door convertible. First experience with PT Cruiser. Never had this problem with any other type automobile seat belt system.
    • Jimm
      2/24/2013 Jimm
      Simple fix - sew a button ito the web of the seat belt - to hold the buckle at the correct height so it's easier to reach.
  • carmgarfole5
    carmgarfole5 - 1997 Chrysler LHS - Body & Interior - 2/23/2013
    Fan on heater stays on high, cant turn off
    • CVO
      2/23/2013 CVO
      The blower motor controlled by the AC Heater control via the blower motor resistor 4 speed block.

      Check the AC heater control. a malfunctioning control might deny it to stop the blower motor.
    • HouseCallAuto
      2/23/2013 HouseCallAuto
      Replace the Blower Motor Power Module. probability here is 100% +
  • JOE
    JOE - 2007 Chrysler 300 - Body & Interior - 2/16/2013
    Heater works intermittent, starts with a few 'tap, tap, taps'. Temp. gauge does not work for 30+ mins., then some heat.
    Auto has 141,000 miles. The heater has not worked this winter. It appears if engine has run 30 minutes or more and is turned off, then on - seems to help. The Check Engine light is constant 24/7. I had a diagnostic test at parts retailer which indicated the ...
    • CVO
      2/16/2013 CVO
      Insufficient coolant , trapped air in the cooling system might not have enough coolant to full fill the heater core. Check the radiator coolant level and top it off as needed.

      Some cooling systems have air bleed valves built into the system to aid in the removal of air pockets. Advice: For many cooling systems, the method of removing air pockets is to start the engine and allow it to run with the radiator cap off or loose until all the air escapes from the neck of the radiator. For some systems this method is not sufficient, and the manufacturer has installed air bleed valves usually near or on the thermostat housing.

      If these tips had been followed and the heater is still not working, the blend door actuator may get involved. It is a servo responsible for controlling the mix of warm air from the heater core and cool air from the A/C and outside. If it malfunctions, your climate control system may not respond properly when you change the temperature on the climate control system.

      Both the manual and the automatic systems use this servo to control the blend door. If your ATC system fails to automatically change temp, this is also an indicator that the servo has failed.

      See this blend door actuator........
  • rob
    rob - 2003 Chrysler Town & Country - Body & Interior - 2/6/2013
    Fan control switch only works on high
    How do I take console apart
  • aguzman1948
    aguzman1948 - 2002 Chrysler Town & Country - Body & Interior - 2/3/2013
    Find fuse box location
    Horn not working.Found The Horns,checked connections .
    • HouseCallAuto
      2/3/2013 HouseCallAuto
      Under the hood next to the battery. Fuse #8 (20 amp) is for the horn.
  • scorpiro
    scorpiro - 2002 Chrysler Town & Country - Body & Interior - 2/2/2013
    The takes forever for wipers to come on. Also when I turn on head lights the doors lock
    Lights and. Heater also wipers having problems with them coming on
    • HouseCallAuto
      2/2/2013 HouseCallAuto
      The Body Control module may be having a stroke, a shop grade scan tool has to read BCM codes for the first step.
  • pendragon267
    pendragon267 - 2004 Chrysler Pacifica - Body & Interior - 1/31/2013
    Keyless entry will not lock or unlock doors and when u turn ignition off dash lights come on like the ignition is in on
    It's like ignition is on the on pasition
    0 answer
  • theo101221
    theo101221 - 1999 Chrysler LHS - Body & Interior - 1/31/2013
    All my gauges went out gas,rpm,speed,hot&cold gauges.. What's wrong?
    There all 0 and I took the pic at a Light
    0 answer