REMOVAL & INSTALLATION
Ensure the steering wheel and the vehicle's front wheels are in the straight ahead position.
Disconnect the negative battery cable.
Working through the access holes in the back of the wheel, remove the attaching screws and push the horn pad off the wheel.
Do not attempt to pry the pad off the steering wheel front the front side.
Disconnect the horn wire.
Matchmark the steering wheel and shaft.
Remove the steering wheel retaining nut.
Using a steering wheel puller, remove the steering wheel from the shaft.
Align and install the steering wheel on the column shaft.
Install a new retaining nut and tighten the nut to 45 ft. lbs. (61 Nm).
Connect the horn wire.
Install the horn pad on the steering wheel and tighten the attaching screws securely.
Connect the negative battery cable.
For additional information, see this ...... http://www.autozone.com/.../...rGuideContent.jsp