dave.c ... 1/26/2013

1995 Jeep Grand Cherokee Limited 6Cyl4.0L - Engine

Follow

new radiator,water pump,thermostat,no heat,temp at 150 for over an hour still no heat

Answer This Question

Follow Question what's this?

( characters left)

Add Answer Community Guidelines

answers

• 
  Jimm 1/26/2013

  The hot coolant flows from the engine to the heater core through the "inlet" hose. After circulating through the core, the coolant returns to the water pump through the "outlet" or "return" hose. Both the inlet and outlet return hoses should feel hot when the engine is at normal operating temperature and the heater is on.
  
  1. If the both heater core hoses were cooled, then this vehicle might have an insufficient coolant in the cooling system.
  2. If the heater core inlet hose is hot and the outlet hose is cool, the heater core might be clogged.
  
  Note: check the radiator coolant level and top it off as needed.

  Reply

  0
• 
  charleslong04 1/26/2013

  like jimm said heater core or if none of your other switches work id go with your control switches itself

  Reply

  0