Auto Answers » View Question
mvautoclub
mvautoclub 9/4/2013
1993 Buick Skylark Custom 6Cyl3.3L - Engine
cooling fan not turning on, also cant find sensor location.
1993 buick skylark custom 3.3l cooing fan is not working and cant locat any of the relay, or sensor
2 Answers
  • CVO
    CVO 9/4/2013
    Apply a 12 volts direct to the radiator fan connector for a test. If the fan runs, then replace the
    Coolant Temperature Sensor
    1993 Buick Skylark 3.3L FI OHV 6cyl
    The Coolant Temperature Sensor is located:
    Under hood, passenger side, upper engine area, belowalternator, mounted in intake manifold
    Reply
    0
  • HouseCallAuto
    HouseCallAuto 9/4/2013
    You should see a narrow plastic cover that covers over 5 relays, I think it is one the firewall. remove the cover and the 2nd relay over from the passenger side is the radiator cooling fan relay and this relay should have battery voltage on two of the pins where the relay engages into. if there is no battery voltage then you have an open / burned fuse link down at the starter. Check that first.
    Reply
    0
close

Preview Answer

 
AutoMD Verified Customer
AutoMD obtained proof this customer interacted with the shop.