Auto Answers » View Question
dgsglynn
dgsglynn 7/13/2010
2000 Saturn LS Base 4Cyl2.2L - Transmissions & Drivetrains
Why does my clutch have no pressure?
Clutch did not slip at all but pedal suddenly lost pressure. We replaced the clutch slave cylinder but now it will not hold pressure. I have to pump the clutch repeatedly to ingage. What else could be wrong.
2 Answers
  • yboy82
    yboy82 7/13/2010
    It is possible that air is present in your system. After you replaced your clutch slave cylinder did you bleed your system?
    Reply
    0
  • HouseCallAuto
    HouseCallAuto 7/13/2010
    You have to bleed out the air from the slave cylinder. The clutch master is where the fluid is added.. There is a special and specific bleeding procedure that has to be done exactly as stated in the shop manual. You really need to have a shop manual to perform this procedure. There are special tools required as well.
    Reply
    0
close

Preview Answer

 
AutoMD Verified Customer
AutoMD obtained proof this customer interacted with the shop.