Jack 7/23/2010

1980 Dodge Challenger Base 4Cyl2.6L - Engine

Follow

This is for a 71 Dart Swinger w/a 360. Scroll down does not list my yr.

will a rad for a 340 provide sufficent cooling for a 360?

Answer This Question

Follow Question what's this?

( characters left)

Add Answer Community Guidelines

answers

• 
  Bobby 7/23/2010

  IF the radiator for the 340 is smaller or has a smaller capacity then the one for the 360 then no it will not be sufficient. You could also get the two part numbers and if they are different most likely then no they are not interchangable. If it is the same part number then they use the same radiator. After researching it a bit you will need to measure it to match it correctly, there are a lot of sites that specialize in radiators. The two appear to be very similar for the 340 and 360 however the inlet tube measurements appear to be different and some other minor differences.
  
  here is the site
  http://www.racepages.com/products/index.php
  
  I would measure your radiator and see which one it is The Demon should be the same for the 360

  Reply

  0