How-to Guides & Videos

AutoMD's Do It Yourself and expert community
has you covered. Just follow our easy step-by-step
instructions
in our auto repair manuals.

How-to » Body & Interior » Exterior » How to Replace a Rear Distance Sensor
 Note: This is a general guide for all vehicles.

How to Replace a Rear Distance Sensor

TOOLS
  • Screwdriver
  • Needle Nose Pliers
STEPS
Edit
Moderate
Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.

1
Inspect the rear distance sensor.
2
From underneath the vehicle disconnect the wiring harness from the sensor.
3
Press tabs to release the rear distance sensor and remove from the bumper.
4
Install new rear distance sensor through the hole in the bumper.
5
Connect the wiring harness to the new rear distance sensor.
6
Start vehicle and test rear distance sensor to verify repairs.
Help improve this guide!  Edit
 
Did you find this guide helpful?  Yes No

 
AutoMD Verified Customer
AutoMD obtained proof this customer interacted with the shop.