Note: This is a general guide for all vehicles.
How to Replace Window Run Channel Seals
- STEPS
-
Edit
Moderate
This guide requires the following supplies:
Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
- Silicone Spray
Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
1
Road test the vehicle to determine which door has a wind leak.
2
Run water over the door to verify the door weather stripping is not the source of the wind leak.
3
Roll down the window.
4
Remove the window run channel seal.
5
Slide the window run channel seal into the window run channel.
6
Roll window up.
7
Road test the vehicle and check for air leaks.
