Note: This is a general guide for all vehicles.
How to Replace a Windshield Wiper Switch
- STEPS
-
Edit
Moderate
Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
1
Turn the key to the on position to provide power to all interior accessories.
2
Locate the wiper switch mounted to the steering column.
3
Turn the wiper switch to the on position.
4
Inspect the wipers for proper operation while selecting different speeds.
5
Turn the key to the off position. Disconnect the negative battery cable.
6
Disconnect the wiring harness from the switch.
7
Remove the old switch and replace it with a new switch.
8
Connect the wiring harness to the new switch.
9
Connect the negative battery cable.
10
Test the wiper switch for proper operation to verify the repair.
