Note: This is a general guide for all vehicles.
How to Replace a Power Seat Switch
PARTS
- Seat Switch
TOOLS
- Screwdriver
- 3 more tools
- STEPS
-
Edit
Moderate
Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
1
Locate the power seat switch.
2
Remove the seat trim panel to gain access to back side of the power seat switch.
3
Check the power seat switch inputs to make sure the switch has power and ground.
4
Supply power and ground to the power seat motor (bypassing the power seat switch).
5
Remove the switch connector. Remove the power seat switch from trim panel.
6
Install a new power seat switch.
7
Connect the power seat switch connector.
8
Reinstall the trim panel and power seat switch onto the bottom of the seat.
9
Move the power seat to verify that the power seat switch has been installed correctly.
