Note: This is a general guide for all vehicles.
How to Replace a Fog Light Assembly
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.
Visually inspect the fog light assemblies.
Disconnect the wiring harness from the fog light assembly.
Remove the fog light assembly mounting screws. The mounting screws are usually located on the back of the fog light assembly.
Remove the fog light assembly from the vehicle.
Install the new fog light assembly using the original mounting screws.
Tighten the mounting screws securely. Do not over tighten the screws or damage to the assembly may occur.
Connect the wiring harness to the fog light assembly.
Turn the fog light switch on and verify that the lights are working.
Help improve this guide!
Did you find this guide helpful?